Custom Audio Electronics KM216H, Command Reference Manual

Page: 31 / 48

• The calculated result from combining this command with others is truncated to the
minimum value of the mechanical pitch or an exact multiple of that value.
[Default]
200 Dpi Model
x = 204
y = 408
300 Dpi Model
x = 300
y = 600
[Reference] $1B $20, $1B $24, $1B $5C, $1B $33, $1B $4A, $1D $4C, $1D $57
[Example]
$1D $56
Printers: KM216H, KPM216H
[Name]
Select cut mode
[Format] Mode n ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
Mode o ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range] Mode n m = 0, 48
Mode o m = 65, 0 ≤ n ≤ 255
[Description] Selects cut mode and executes the cut command.
m
selects cut mode as follows:
m FUNCTION
0, 48 Total cut.
65, 66 Form feed (cut po [ n × vertical motion unit]) and total cut
[Notes] • This command is only enabled if set at the beginning of the line.
• The horizontal and vertical motion units are speci fi ed by $1D $50.
[Default]
[Reference] $1B
$69
[Example]
$1D $57
Printers: KM216H, KPM216H
[Name]
Set printing area width
[Format] ASCII GS W nL nH
Hex 1D 57 nL nH
Decimal 29 87 nL nH
[Range] 0 ≤ nL, nH ≤ 255
0 ≤ nL + nH × 256) ≤ 832
[Description] Sets the printing area width to the area speci fi ed by
nL
and
nH
. The
nMAX
value is:
200 Dpi Model 1600
300 Dpi Model 2368
ESC/POS™ Emulation
Command Reference
31