Custom Audio Electronics KM216H, Command Reference Manual

Page: 23 / 48

$1B $69
Printers: KM216H, KPM216H
[Name]
Total cut
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Range]
[Description]
This command prints the data in the buffer and enables cutter operation. If there is no
cutter, a disabling
fl ag is set and any subsequent cut commands will be ignored.
[Notes] • The printer waits to complete all paper movement commands before it executes a total
cut.
[Default]
[Reference]
[Example]
$1B $76
Printers: KM216H, KPM216H
(serial interface only)
[Name]
Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Range]
[Description]
When this command is received, transmit the current status of the paper sensor.
[Notes] This command is executed immediately, even when the data buffer is full (Busy ). The
status to be transmitted is shown in the table below:
BIT OFF/ON HEX Decimal FUNCTION
0,1
Off 00 0 Near paper-end sensor: paper present
On 03 3 Near paper-end sensor: paper not present
2,3
Off 00 0 Paper-end sensor: paper present
On (0C) (12) Paper-end sensor: paper not present
4 Off 00 0 Not used. Fixed to Off
5 - - - Unde fi ned
6 - - - Unde fi ned
7 Off 00 0 Not used. Fixed to Off
[Default]
[Reference]
[Example]
ESC/POS™ Emulation
Command Reference
23