Cushman Truckster XD 2018, Owner'S Manual

Page: 43 / 82

B
OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
37
Owner’s Guide
CENTER CONSOLE
Parking Brake
Lift the parking brake lever to the vertical position to engage the parking brake. When you engage parking brake, press
the clutch pedal, put the transmission in 1st gear and stop the engine.
When the parking brake is engaged, the parking brake light on the instrument panel will illuminate. Do not drive the
vehicle with the parking brake engaged.
To disengage the parking brake, lower the parking brake lever to the disengaged position.
Gear Selector
The gear selector is to engage the transmission gears. The gear selector knob has the gear
pattern marked in the top surface.
Completely press the clutch pedal and change the transmission to 1st gear. Slowly release
the clutch pedal while pressing the accelerator pedal. When driving forward, always start in
1st gear and change to higher gears as vehicle speed increases.








      







  
  