background image

Page 29

Owner’s Manual and Service Guide

GENERAL SPECIFICATIONS

BELLHOP 4

BELLHOP 4 GASOLINE POWERED PERSONNEL / CARGO CARRIER

WEIGHT (dry fuel tank)...................................................... NA**
TIRES ................................................................................ 18 x 8.50 x 8 (LINKS 4 ply)
TIRE PRESSURE .............................................................. 18 - 22 psi (124 - 152 kPa)*
LOAD CAPACITY (including operator, passengers,

cargo and accessories) ........................ 1200 lbs. (544 kg)

CARGO BED ..................................................................... 42.5 in. (108 cm) width; 32 in. (80 cm) length;12 in. (31 cm) height
CHASSIS ........................................................................... Welded high yield strength tubular steel with Durashield™

Powder Coat 

paint

BODY & FINISH................................................................. Durashield™

body of automotive quality injection molded TPE 

(thermoplastic elastomer). Automotive color coat/clear coat finish

SAFETY ............................................................................. Dash mounted key switch, reverse warning indicator, ‘deadman’ 

accelerator control, integral handgrip on hip restraints, manual forward/

reverse selector and electric horn

LIGHTING PACKAGE........................................................ Optional Headlights, taillights, brake lights, optional turn signals
BRAKES  ........................................................................... Dual rear wheel mechanical, self-adjusting drum brakes. Combination 

service / park brake with automatic parking brake release (accelerator 

kick-off). Optional hydraulic front disc brakes

FRONT SUSPENSION ...................................................... Leaf springs with hydraulic shock absorbers
REAR SUSPENSION ........................................................ Leaf springs with hydraulic shock absorbers
STEERING......................................................................... Self-compensating single reduction rack and pinion
DASH PANEL .................................................................... Four drink holders of scuff resistant thermoplastic 
SEATING ........................................................................... Formed, fabric-backed vinyl covers over cushion foam. Seating for two 

occupants per seat

ENGINE ............................................................................. 13 HP (rated), 401 cc Single Cylinder, Air Cooled, Overhead Valve 

Pressurized Lubrication with replaceable Oil Filter Internal Balance Shaft 

Solid State Ignition Replaceable Dry Cartridge Air Filter & Remote Intake 

Fixed Jet Bowl Carburetor, Pulse Fuel Pump

VALVE TRAIN.................................................................... Overhead valve
LUBRICATION................................................................... Pressurized oil system, replaceable filter
BALANCER........................................................................ Internal counter rotating balance shaft
IGNITION ........................................................................... Transistor type flywheel magneto
CARBURETOR.................................................................. Fixed jet float bowl with remote pulse fuel pump
AIR CLEANER ................................................................... Replaceable dry cartridge element
DRIVE TRAIN .................................................................... Automatic, continuously variable transmission (CVT), forward and reverse
ELECTRICAL SYSTEM ..................................................... External starter/generator, solid state regulator, 12 volt maintenance free 

battery

TRANSAXLE...................................................................... High efficiency differential with helical gears, 11.42:1 ratio, ground speed 

governor, forward and reverse

FUEL SYSTEM .................................................................. 5.3 gal (20.0 liters) capacity tank with dash mounted electric fuel gauge 
FUEL.................................................................................. Fresh Regular Grade Unleaded (87 Octane minimum). Ethonol blend fuels 

upto 10% permissible.

SPEED............................................................................... 16 mph ± .5 mph (26 kph ± .8 kph)
NOISE................................................................................ Sound pressure; continuous A- weighted equal to or less than 76 dB(A)
VIBRATION, WBV ............................................................. The weighted RMS acceleration is 0.89 m/s²
VIBRATION, HAV .............................................................. The weighted RMS acceleration is 5.22 m/s²
                                                                                    

                                                                          BELLHOP 4 CARB

Same as BELLHOP 4 Gasoline except for fuel system parts to meet California emissions standards. See Parts Manual for 
replacement parts.
* Do not use low inflation pressure tires on any E-Z-GO vehicle. Do not use any tire which has a recommended inflation pressure less 
than the inflation pressure recommended in Owner’s Manual.
Specifications subject to change without notice

** 

Not available at the time of publication.

Summary of Contents for BELLHOP 2











































































Reviews: