190002 installed
on all brackets
5/8 x 7-1/2 tube
Assemble the brackets as shown in Figure 2 and
locate them on the boom assembly as shown in
Figure 3. It is easier to assemble the brackets on
the boom at the correct location, rather than try
to slide them on the boom. If you are going to
leave this assembly unattended for more than 15
minutes, we suggest that you tighten the eight
(8) bolts on each bracket, so that they do not
vibrate off. Do not tighten the anchor bolts on the
elements until the elements are completely
installed and aligned. Mark the bracket location on
the boom with a marker at the edge of the bracket
instead of the center. This will ensure the mark is
still visible when the bracket in is the correct spot.
Start from the rear of the boom and work forward.
The measurements are given in total inches from
the rear of the boom. If you need the distance from
each element to the next you may subtract the bracket
measurements to obtain this value. Total distance
is given for better accuracy in element placement.
Distance between elements measurements will cause
cumulative errors as each element is placed.
1/4-20 x 3/4
1/4-20 x 3/8
1/4-20
Square
1/4-20
1/4
#12 or #13 Bracket
5/8 Insulator on
#13 bracket only
1/4-20 x 3/8
Figure 2
3
1
-9
/1
6
4
9
-1
3
/1
6
8
7
2
4
3
-1
/4
1
6
5
3
3
0
-5
/8
4
1
0
3 inches
Figure 3
#13 bracket
with insulator
#12 bracket
#12 bracket
#12 bracket
#12 bracket
#12 bracket
#12 bracket
#12 bracket
Inches from rear of boom
to back of bracket
