Feed Loop Assembly
To assemble the feed loop onto the boom you will need the following parts.
2 feed loop ends
1 long 7/16 tube
2 short 7/16 tube
1 insulator
8-32 x 1 bolt
8-32 x 2 bolt
8-32 nuts and lock washers
7/16 X 30
7/16 X 14-1/2
Insert each tube 3 inches into the next using the marks you made. Try your best
to align the holes in each tube. Tighten the hose clamps just enough so that the
tubes do not move. Final alignment of the tubes will likely be needed later. Now
would be a good time to support the boom on a couple of saw horses or something
similar.
Summary of Contents for LFA-2M16EL
Page 12: ......
