Curtiss-Wright AXN, User Manual, Page: 47 / 74

C
HAPTER
3: C
ONFIGURING THE
AXN
SYSTEM
43
Configuring the AXN/ADC/401 for RTD 2/4 wire inputs or RTD 3 wire inputs
The same procedure for configuring RTD 2/4 wire and RTD 3 wire can be followed. The only difference is when
choosing the Input Mode setting.
1. In the Input Mode column of the channel you want to configure, click the drop-down arrow and do one of the
following:
• For RTD 2/4 wire input, choose RTD sensor 2/4 wires .
• For RTD 3 wire input, choose RTD sensor 3 wires .
2. Configure Filter Mode and Filter Cutoff for each filter tap point. (See “Defining Filter Mode and Filter Cutoff for
Input Modes” on page 32 .)