background image

WARNINGS

WARNI NG

TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other 

outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock  

hazard, do not expose this appliance to rain or moisture.

The lightning flash with arro-

whead symbol,within an equ-
ilateral triangle is intented to 

alert the user to the presence 
of uninsulated

' dangerous vo- 

ltage' within the product's  en-

closure that may be of suffici-
ent magnitude to constitute a 
risk of  electric shock to perso-

ns.

CAUTION : TO REDUCE THE 

RISK OF ELECTRIC SHOCK 

DO NOT REMOVE COVER (   

OR BACK),NO USER SERV- 

ICEABLE PARTS INSIDE  R- 

EFER SERVICING TO  QUA- 

LIFIED SERVICE PERSON-

NEL 

The exclamation point within 

an  equilateral triangle is int-

ended to alert the user to the    

presence of important opera-

ting  and maintenance (servi- 

cing) instructions in the liter- 

ature accompany-ing the ap- 

plicance

IMPORTANT   SAFETY   INSTRUCTIONS

  1 Read these instruction.

  2  keep these instructions.

  3  heed all warnings.

  4  Follow all instructions.

  5  Do not use this product near water(swimming pool, beach, lake etc.).

  6  Clean only with a dry cloth.

  7  Do not block any of the ventilation openings.Install in accordance with the manufacturer's instructions . 

  8  Do not install near any heat sources such as radiators, heat registers . Stoves or other apparatus     

      (including amplifiers)that produce heat.

  9  Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two 

      blades with one wider than the other. A grounding type plug has two blades and a third grounding 

      prong. The wide  blade or the third  prong is  provided for  your safety. If the provided  plug does not 

      fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10  Protect the power cord from being walked on or pinched particularly at receptacles and the point  

      where they exit from the stereo.

11  Only use attachments/accessories specified by the manufacturer.

12  Unplug this apparatus during lightning storms or when unused for long periods of time

13  Refer all servicing to qualified service personnel. Servicing is required when the system has been 

      damaged in any way, such as a damaged power-supply cord or plug . Has been exposed to rain or 

      moisture ,does not operate normally , or has been dropped.

14  This appliance should not be exposed to dripping water or splashing water and objects filled with       

      water, such as vases, should not be placed on this unit

  

Summary of Contents for RCD904











Reviews: