background image

English

English

13

14

7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.

8. When the record is finished the turntable will automatically  stop.

9. To stop the record whilst it is playing. Press the Stop Button, The the turntable will

automatically  will stop.

Notes: Do not stop or turn the platter manually.

Moving or jarring the turntable without securing the Tonearm clamp could result in

damage to the Tonearm.

Replace the protective cap on the stylus when not in use.

REMOTE CONTROL UNIT

PREPARATION BEFORE USE

1.

Remove the battery cover from the back of the remote control unit.

2. Insert two “

AAA

” size batteries

 (not included)

. Insert the batteries with the + and - terminals 

matching 

the indication inside the battery compartment.

3.

Replace the cover.

1. Standby/On  Button

2. Stop Button

3. Play/Pause Button

4. CD Skip Forward / Backward Button

5. Program Button

6. Disc Button

7. Mute Button

8. Volume Up/Down Button

BATTERY REPLACEMENT

When the remote control operation becomes unstable or the distance from which remote

control is possible becomes shorter, replace the batteries with new ones.

USING THE REMOTE CONTROL UNIT

To use remote control unit, point it at the remote sensor (22) and press the button gently

and frimly. Remote control is possible within about 5m (approx. 16FT). However, since

the remote control range is less when the unit is used at an angle, use directly  in front

of the remote sensor, as far as possible.

Do not expose the remote sensor to strong light (direct sunlight or artificial lighting) and

make sure that there are no obstacles between the remote sensor and the remote

control unit.

If you press the MUTE button (7), the sound will be muted. Repress MUTE or the

VOLUME controls to return to normal sound level.

IMPORTANT

Since movement of the CD mechanism and the sensitive circuitry may cause interference

to a radio tuner nearby switch this unit off while operating other radio devices.

This product utilizes a laser

Danger -

Invisible laser radiation when opened and interlock failed or defeated. Avoid

direct exposure to the beam.

Caution - Use of controls, adjustments, or procedures not listed in this manual may result

in hazardous radiation exposure.

Concerning Compact Discs

Only compact discs identified with this mark can be used with

this player.

1

2

3

4

5

6
7

8

Summary of Contents for RCD904











Reviews: