Curtis RCD744, Instruction Manual

Page: 7 / 14

PREPARATION FOR USE
SETTING THE CLOCK
Remove the unit carefully from the box, retaining the packaging for future use.
Read these instructions carefully before use.
CONNECTIONS
Connect the speakers to the speaker sockets on the back of the unit.
Connect the right speaker to the right socket and the left speaker to the left socket.
Connect the AM loop antenna to its socket at the rear of the product.
Extend the FM antenna.
SPEAKER
Speaker may be placed away from the main unit by unwinding the speaker cable.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference to a radio tuner
nearby, switch this unit off while operating other radio devices.
This product utilizes a laser
Danger - Invisible laser radiation when opened and interlock failed or defeated. Avoid direct exposure to
the beam.
Caution - Use of controls, adjustments, or procedures not listed in this manual may result in hazardous
radiation exposure.
AC POWER OPERATION
Connect the power cord from the main supply having 120V/60Hz only .
Then press the STANDBY/ON button to switch the unit on or off.
Disconnect the power cord from the mains supply if the unit is not going to be used for some Time.You
may need to reprogram any memory settings.
At STANDBY / ON mode , press MEMORY / CLOCK-ADJ button for 3 seconds , the time systems
will flash on the display . SKIP / TUNER or button to select your
dseired time system (12 / 24HRS. ) and press MEMORY / CLOCK-ADJ button to confirm the time
system . At this time , the hour digits will flash, Press the SKIP / TUNER or button to set
your local time for HOURS ,then press MEMORY / PROGRAM button toconfirm . At this time,
the MINUTES will flash on display . Press the SKIP /TUNER or button to set your local
time for MINUTE.