5
ERROR MESSAGE
DESCRIPTION
CAUSE
(900) 000-0000 EXT (0000)
Water Level ERR.
Fill run error/Overflow
The fill solenoid has either run for
more than 10 minutes on the initial
tank fill or 1 minute, 30 seconds in
normal operation.
Break in the temperature thermistor
circuit.
Open Probe
(900) 000-0000 EXT (0000)
Sensor Error
(900) 000-0000 EXT (0000)
Over Temp. Error
Excess Temperature
The sensor is reading the tempera-
ture in the heating tank has risen
above 210ºF.
1-(800)-000-0000
Water Level Error
1-(800)-000-0000
Sensor Error
1-(800)-000-0000
Over Temp. Error
Error Message
An error message will appear on the screen in the event of a malfunction under the following conditions:
1. Water Level Overflow.
2. Break in Temperature
Control Circuit
3. Excess Temperature in
Heating Tank
To turn off an error message,
press the
button for five
seconds.
Warmers
The warmer, under the brewcone will turn on automatically
whenever a coffee brew cycle is started. The warmers may
be switched on and off using the WARMER buttons on the
control panel.
CLEANING
Regular cleaning of your coffee brewer will maintain the highest quality coffee your equipment is capable of producing. A proper cleaning is
essential in preserving the appearance of the brewer.
1. Turn off the unit at the button on the front control panel.
2. Wipe exterior surfaces with a damp cloth, removing spills and debris.
3. Slide the brewcone out and clean it. Thoroughly soap the sprayhead area with a mild detergent solution.
4. Wash the brew basket. Use a soft bristled brush for hard to clean areas. Wash both parts with a detergent solution or put these parts
through a dishwasher.
CAUTION:
DO NOT use undiluted bleach or chlorine.
LEFT & RIGHT
SATELLITE WARMERS