Curtis G3 GEMX IntelliFresh FreshTrac GEMXSIFT Series, User Manual, Page: 10 / 42

OPERATING INSTRUCTIONS OI50
(&.94*'5(&.95*'501&3"5*/(*/4536$5*0/4øø "
Brewing Instructions
Place an empty GEMX
IntelliFresh
satellite under the
brew basket. Make sure the
satellite is pushed all the way
back against the front cover
and is making contact with
the electrical socket.
3 *OTFSUBDMFBOQBQFSmMUFSJOUP
the brew basket.
Fill with the proper amount
of amount of ground coffee.
-FWFMUIFDPGGFFJOUIFmMUFS
5
4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee based on the settings programmed into the universal control module
(UCM). To change the settings, see the
PROGRAMMING GUIDE
section. When brewing starts,
the warmer will come on inside the satellite. Press the warmer button to change the heat setting
(low, medium, high).
The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display.
6 Press the brew button. Brewing
will begin immediately.
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while “Brewing” appears on the display.
NOTICE - Only use GEM3XIFT IntelliFresh
®
satellites on GEMX
™
series IntelliFresh brewers.
The G3 GEMX Intellifresh brewer is factory preset for optimal performance.
Warmer Button