4
Parts List
Guidelines for Pulse Brew:
The pot level should always be set first, with the Pulse Brew option OFF. Depending on your grind profile and water conditions, the
five Pulse Brew options help “tune” or change the coffee flavor. Filter Pack type coffees typically extract better with the A and B pulse
setting. Decaffeinated coffees typically extract better with the B pulse setting. High-Yield coffees typically extract better with the C pulse
setting. Of course, any of the A, B or C settings may be used to suit your taste profile. There are two additional settings (D and E) that
allow you to manually set the ON TIME pulses and OFF TIME.
If Pulse Brew is selected (ON), Cold Brew Lock is set to Delta 1 within 5º F of set point. Cold Brew Lock and Pre-infusion disappears
from the list of program selections. When Pulse Brew is ON, Pre-Infusion disappears from the list of program selections.
Display Brew Time (Factory set to ON)
Press
to display ON or OFF. Pressing either < or > toggles between on and off.
to set. When on, the Display Brew Time feature
allows you to see the remaining time in the brew cycle counting down.
Drip-Out Mode (Factory set to 2 min)
Press
to select. Press > to increase time (to a maximum of 5 minutes) or < to decrease the time and turn OFF. Time counts up in 5
second increments. Press
to set.
Display Messages (Factory set to ON)
Press
to turn ON or OFF. The message displayed is “Rinse Server Before Brewing”. This message will alternate; two seconds with
Rinse Server Before Brewing, then Curtis READY TO BREW will appear for six seconds.
Model Select (Factory set to D1000GT)
Press
to select. Press > or < to toggle between D1000GT and D500GT 2Batch. Press
to set.
Exit
Press
to select, exits program mode and returns unit to operation. Pressing > returns you to Brew By Volume.
Exit
Drip-Out
Mode
Display Brew
Time
Display Messages
Model Select
LEG, 3/8-16 STUD SCREW
TANK, COMPLETE D1000GT 220V
TANK, COMPLETE D1000GT 120/220V DV
VALVE, INLET 2 GPM
VALVE, INLET 1 GPM 240V 10W
SWITCH, TOGGLE NON-LIT DPST 25A
KIT, VALVE REPAIR (FOR #s 3, 3A, 5, 5A)
GRID, DRIP TRAY AIRPOT (OPTIONAL)
TUBING, SILICONE, 5/16” I.D. ( 1 FT.)
KIT, PROBE WATER LEVEL O-RING & NUT
ELEMENT, HEATING 2.5W 220V
GUARD, SHOCK HEATING ELEMENT
SENSOR, TEMPERATURE TANK
GUARD, SHOCK RESET THERMOSTAT
THERMOSTAT, HI LIMIT HTR CONTROL
COMPOUND, SILICONE 5 OZ TUBE
KIT, HEATING TANK LID
KIT, VALVE REPAIR USE ON WC-847
Item № Part №
Description
16
17
17A
18
18A
19
20
21
22
23
24
25
26
27
28
29
30
31
WC-3503
WC-75285
WC-75284
WC-847*
WC-856
WC-103*
WC-3763*
WC-6221
WC-5310*
WC-5527K*
WC-934-04*
WC-4394
WC-1438-101*
WC-43055
WC-522*
WC-5231*
WC-37008*
WC-3765L*
BREW CONE, ASSY S.S. (OPTIONAL)
COVER, TOP
VALVE, DUMP VALVE LEFT 120VAC 10W
VALVE, DUMP LEFT 220V 12W
KIT, FITTING SPRAY HEAD KYNAR
VALVE, DUMP RIGHT 120V 12W
VALVE, DUMP RIGHT 240V 9W
BRACKET, UCM
KIT, UCM & OVERLAY D1000GT
CONTROL MODULE, 220V D1000GT/H
LABEL, UCM OVERLAY D1000GT CURTIS
COVER, FRONT D1000GT
FAUCET, HOT WATER W/JAM NUT
SEAT CUP, SILICONE (USE ON WC-1809)
HEAT SINK, 1 PH ASSEMBLY
SPRAY HEAD, PURPLE ADVANCE FLOW
CAPACITOR, X2
LEG, GLIDE 3/8-16 STUD SCREW
Item № Part №
Description
1
2
3
3A
4
5
5A
6
7
7A
8
9
10
11
12
13
14
15
WC-3316
WC-5421
WC-889*
WC-860
WC-2962-101K
WC-817*
WC-861
WC-67101
WC-37177*
WC-789
WC-39396
WC-5847
WC-1809
WC-1806
WC-8560
WC-29025*
WC-8591*
WC-3518