INSTALLATION INSTRUCTIONS
II42
Set the Timer Clock for Initial Operation (some models)
11 With the main power switch off, turn the outer wheel
on the timer clockwise until the correct time (AM or
PM) lines up with the arrow on the clock face.
12 Check to make sure that all of the timer tabs are
rotated to the “freeze” position (see diagram).
$'#*/45"--"5*0/*/4536$5*0/4ø
052218NC
Power Up the Unit
13 Connect the power cord to the appropriate type of
electrical outlet.
14 Make sure that the circuit breaker supplying power to
the unit is on.
15 Turn ON (|) the main power switch.
16
$MFBOBOETBOJUJ[FUIFVOJUCFGPSFVTJOHJUGPSUIFmSTU
time as instructed in the
CLEANING INSTRUCTIONS
section. Verify that the unit is operating properly
according to the
OPERATING INSTRUCTIONS
section.
NOTICE:
• Set the timer only with the main power switch in
the OFF (O) position.
• Turn the timer wheel only by hand and only in
the clockwise direction.
WARNING:
Connect the power cord to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cord, have it upgraded by a licensed electrician.
Do not modify the power plug. Do not use an
extension cord.
IMPORTANT:
The unit may not operate as
desired if the timer clock is not set properly.
12
12 11
10
9
8
7
5
4
3
2
1
PM
12
11
10
9
8
7
5
4
3
2
1
AM
9
6
3
Main power
switch off
Style varies
Make sure all timer
tabs are in “freeze”
position
Turn outer wheel
clockwise to set
AM/PM
arrow
Front view
Side view
