OPERATING INSTRUCTIONS
OI60
$'#01&3"5*/(*/4536$5*0/4øø
"
Bowl Lights
Push (|) on the light switch to turn on the integral lid lights.
Adjusting Beverage Thickness
Use the adjustment screws at the back of each mixing bowl
to adjust beverage thickness. The recommended (factory
EFGBVMUTFUUJOHJT*OTFSUBnBUCMBEFTDSFXESJWFSJOUPUIF
adjustment hole as shown and turn to adjust. The indicator
on the back will move to indicate the thickness level.
The higher the number, the thicker the frozen beverage
consistency.
How to Read the Digital Temperature Display (some models)
The temperature display indicates the temperature in the mixing bowls. The display changes every three seconds
to show the temperature in a different bowl. The dot at the bottom of the display indicates the bowl temperature
UIBUJTDVSSFOUMZCFJOHEJTQMBZFE4FFUIFEJBHSBNTCFMPXGPSNPSFJOGPSNBUJPO5IFCPXMTBSFOVNCFSFE
and 3*, left to right, when facing the front of the unit.
IMPORTANT:
When the thickness level is set to
higher levels, (around 4) the lid should be fastened
to prevent it from coming off during operation.
MAX
4
3
2
1
MAX
4
3
2
1
MAX
4
3
2
1
NOTE:
If the display shuts off, it can be reset by pushing the down arrow button (
d
).
1
2
3
1
2
3
1
2
3
* CFB3 only
Bowl 1 display
indicator
Bowl 2 display
indicator
Bowl 3 display
indicator*
