INSTALLATION INSTRUCTIONS
II42
7 Locate the dispensing levers, packaged inside the
bowls. Install them on the tap handles. While pulling
outward on both sides of the base of the dispensing
lever, insert the pins on the bottom of the handle into
the base holes on the lever.
Attach Drip Trays and Handles (cont.)
$'#*/45"--"5*0/*/4536$5*0/4ø
052218NC
Base
Spring must be
between mounts
Lever
Mount
(lubricate)
Push
here
7
9
10
8
Handle
Line up as
shown
Lubricate tap
seal (red)
8 Lubricate the tap mounting slots using food grade
lubricant.
9 Prepare the tap handle assembly for attachment.
Lubricate the red rubber seal on the back of the tap
handle assembly with food grade lubricant and insert it
into the tap hole on the bottom of the bowl. Line up the
middle pins on the handle with the mounting slots.
10 Attach the tap handle assembly. Push in with your
thumb on the center of the handle until the tap handle
assembly pops into place.
continued....
