![background image](http://html1.mh-extra.com/html/curtis/3301t/3301t_manual_2699991015.webp)
2 — USING THE 3301T
pg. 9
Curtis Model 3301T Digital Instrumentation – September 2021
VIEW FAULT NAMES
The Fault Name screen displays the names and fault codes of active faults. In the following example,
faults are active for traction and pump controllers:
Take the following steps to access the Fault Name screen:
1. Go to the home screen.
2. Press the
+
+
button.
3. If there are too many faults to display on one screen, the bottom of the Fault Name screen will
display upward-facing and downward-facing triangles. Use the
H
and
buttons to scroll
through the screens.
To exit the home screen, press the
+
+
button.
VIEW AND EDIT PARAMETERS
You can use the 3301T to view and edit parameters for the 3301T and for other Curtis devices
connected through the CANbus or the serial port. The 3301T parameters are contained by the menus
described in the
chapters. The parameter menus
can be accessed when the home screen is visible.
Parameters have two access levels: User and OEM. The OEM level provides access to more parameters
than the User level. The following table describes how the 3301T access levels correspond to the
access levels for
:
Table 1 3301T and Curtis Programming Device Access Levels
3301T
Curtis Programming Device
User
Field Intermediate
OEM
OEM Dealer
A password is required to access the 3301T’s parameter menus and the read-write parameter menus
of other Curtis devices. The access levels have different passwords. When you enter a password, the
password is not cleared when the device returns to the home screen; this is for convenience when
testing and debugging parameter changes. After you have finished working with parameters, cycle
the keyswitch to clear the password.