5 of 10
CARE AND MAINTENANCE
Every 50 hours of operation, clean the exterior of the condenser.
Periodically inspect and tighten hardware after every 40 hours of operation for the entire life of the air
conditioner.
This product is designed with the use of R134a as a refrigerant. Never substitute other refrigerants, use of
any other refrigerant will void warranty.
Charge unit with 2.1 lbs. of R134a refrigerant.
Apply vacuum to for a minimum of 20 minutes prior to charging the air conditioner with R134a.
Do not vent refrigerant to the atmosphere. If the unit has to be discharged for any reason, recover the
refrigerant in compliance with federal, state and local laws.
Replace the drier receiver (9SV-9AC-00003) when replacing a compressor (9SV-9AC-00006).
Wash the painted surfaces of the air conditioner with commercial automotive cleaning products.
FEATURES & OPERATION
Your new Curtis Air Conditioner is designed to make your driving experience more comfortable in hot weather.
Turn the 4 POSITION VENTILATION SWITCH to activate the blower. The air conditioner may be used as a fan
in this manner.
Toggle the A/C ON-OFF SWITCH to activate the compressor for chilled air. The blower must be turned on
before the compressor will activate.
VENTS
VENTS
4-POSITION VENTILATION SWITCH
OFF-LOW-MED.-HIGH
THIS SWITCH OPERATES THE BLOWER
FAN, AND MUST BE ON FOR THE
COMPRESSOR TO START.
A/C ON-OFF SWITCH
BLUE LED SHOULD BE ON
WHEN A/C IS RUNNING.
