4 — MONITOR MENU
pg. 27
1212 & 1212P Manual - Sep 2019
4 — MONITOR MENU
Through its Monitor menu, the 1311 programmer provides access to real-time data during vehicle
operation. This information is helpful during diagnostics and troubleshooting, and also while
adjusting programmable parameters.
MONITOR MENU
VARIABLE
DISPLAY RANGE
DESCRIPTION
Temp
–55 – +127 °C
Controller’s internal temperature.
Battery Voltage
0–38.2 V
Battery voltage.
Motor Voltage
–27.4 – +27.4 V
Voltage drop between the motor terminals.
Motor Thermal Cutback
0–100 %
Current cutback during motor over-temperature, as a percentage of max
current. 100% = no cutback.
Armature Current
–90 – +90 A
Measured motor armature current.
Current Limit
0–90 A
Ultimate current limit of the controller, taking into account boost mode,
thermal protection, etc.
Resistance
0–854 mW
Measured system resistance,when the motor is stalled.
Throttle
0–100 %
Available throttle input.
Speed Limit Pot
0–100 %
Available speed limit pot input.
Mode Input
On/Off
Status of the mode switch (at J1-4).
Reverse Input
On/Off
Status of the reverse switch (at J1-12).
Inhibit
On/Off
Status of the speed inhibit switch (at J1-6).
EMR Input
On/Off
Status of the emergency reverse switch (belly button switch).
Push Input
On/Off
Status of the push switch (at J1-14).
Main Contactor
On/Off
Status of the main contactor driver.
Brake
On/Off
Status of the EM brake driver.
BDI
0–100 %
Status of battery capacity.
Drive Time
0–65535 hours
Hours of operation since the hourmeter was last reset (Reset Drive Time = On).