manualshive.com logo in svg

Curtis Dyna-Fog 2984, Manual

Share
Download
Curtis Dyna-Fog 2984 Manual Download Page 4

 
Dear Valued Customer, 

 

           Congratulations on your purchase of one of the most

 

advanced Ultra-Low-

Volume applicators available. 

 
   
     

The 

TYPHOON 1 ULV 

aerosol applicator was developed to provide a more 

efficient, low cost method of insect control without

 

sacrificing quality. Technology the 

Typhoon 1 

employs enables you to dispense concentrated formulations at accurately 

low flowrates.  This results in a significant chemical savings and an invaluable benefit to 

the environment. This machines ability to reliably produce consistent droplets are 

unsurpassed in the industry making it a favorite choice among professional users. 

 

 

 

Properly maintained, the 

TYPHOON 1 

will provide years of trouble free service.  

We trust you will agree, the 

Typhoon 1 

will  be a great asset to any spraying program.  

 

 

 

 

Thank you for choosing

 DYNA-FOG. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

4

 

Summary of Contents for 2984




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands