NEED ASSISTANCE?
•
844.278.4357
•
RA
•
PAGE 7
Step 15
Using the 3/4" x 3/4" double-sided tape, place
the magnet on the door so it lines up with the
sensor. Repeat this for the other three doors.
Step 14
Plug the door sensor into the wiring harness
and route it up the door frame, under the carpet.
Note:
Depending on the vehicle, you may need
to use the supplied sensor harness extensions
for the two front door sensors.
Once the harness and sensor are routed to the
desired location, wipe the sensor and door with
the provided alcohol wipe. Place two pieces of
1/2" x 1/2" double- sided tape on the sensor
and attach the sensor to the vehicle.
Repeat this process for the other three doors.
DISCLAIMER:
Use of this switch requires
manual operation of the boards. Failure to
retract the boards when operating the vehicle
could result in damage to the boards or vehicle.
