NEED ASSISTANCE?
•
844.278.4357
•
RA
•
PAGE 1
POWERED RUNNING BOARDS
INSTALLATION MANUAL
Parts List
1
Driver / left running board*
1
Passenger / right running board*
6
Mounting bracket, universal
6
T-rails
12 Clip nut, M8
12 Hex bolt, M8 x 25mm
24 Flat washer, M8
12 Lock washer, M8
12 Nylock nut, 5/16"
2
Rubber grommet
4
Door sensor
2
Door sensor extension
4
Magnet
2
Alcohol wipe
1
Power switch
1
Circuit board
1
Anti-seize
1
Wire loom
1
Wiring harness, two-piece
2
LED light
2
LED light bracket
4
Double-sided foam tape, 3/4" x 3/4"
8
Double-sided foam tape, 1/2" x 1/2"
* Running boards sold separately
Tools Required
Ratchet
Drill
Socket set
Drill bit set
Zip ties
Level
Level of Difficulty
Moderate
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
No maintenance required on waterproof harness or water-resistant motors.
If mud or dirt is built up on the steps, simply spray them off and let them air dry.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Periodic inspection of all wires and connections should be
performed to ensure there is no visible damage or loose connections.
Refer to the last page of this manual for troubleshooting,
warranty and product registration information.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Part Numbers
3025104 (brackets)
3025179 (boards)
3047904 (brackets & boards)
3015104 (brackets)
3015179 (boards)
3037904 (brackets & boards)
Product Photo
Powered Running Boards
(not included)
Front
Rear
Middle
WARNING
Improper electrical installation may result in personal injury. Unless
you are familiar with the installation and handling of electrical systems,
have this step performed by someone who has that familiarity.
Torque Specifications
M
et
ric
M6 bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
5/16" bolt
7 ft-lbs.
3/8" bolt
16 ft-lbs.
7/16" bolt
20 ft-lbs.
1/2" bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
