INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Optional - For ease of install.
Remove the (3) nuts that hold on the canister. Use a
flat blade screwdriver to disengage the spring clips on
the canister for removal. Carefully suspend canister
during hitch installation.
4. Raise the hitch into position and align the holes in the
side plates with the holes in the sides of the frame rails.
Secure the hitch with 7/16" conical toothed washers and
M10 hex bolts into each weldnut
Torque all M10 hex bolts to 48 ft-lbs.
5. Raise exhaust back into postion and secure to vehicle
hanger.
If Step 3 was executed:
Raise canister back into postion and reattach using
factory hardware.
6. Reattach wheel well liners and splash sheilds with
factory hardware. Trimming of the drivers wheel
well liner may be required to give the driver side
plate more clearence.
Installation Complete
Summary of Contents for 11419
Page 4: ......
