GB-14
Oper
ation
Cleaning
and
M
ain
tenanc
e
Specifica
tion
Saf
et
y
W
ar
nings
Bef
or
e
U
se
Delay Start
The starting time of a washing programme can be delayed and adjusted. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Press the
On/Off
button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the
Delay
button.
5. Set the required delay start time using the
Delay
button.
6. Close the door. Press the
Start/Reset
button and the unit will start the programme at the assigned
time automatically.
Cleaning After Use
External Care
The Door and the Door Seal
Clean the door seals regularly with a soft damp cloth to remove food deposits.
When the dishwasher is being loaded, food and drink residues may drip onto the sides of the dishwasher
door. These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any
deposits should be wiped off these surfaces before the door is closed.
The Control Panel
If cleaning is required, the control panel should be wiped with a soft damp cloth ONLY.
•
ATTENTION
: To avoid penetration of water into the door lock and electrical components,
do not use a spray cleaner of any kind.
•
Never use abrasive cleaners or scouring pads on the outer surfaces because they may
scratch the finish. Some paper towels may also scratch or leave marks on the surface.
•
Each press of this button increases the delay start time by 1 hour increments.
Currys Essentials CDWTT10_IB_100413.indd 14
4/13/10 5:10 PM