background image

17

Maintenance - Cleaning the Washing Machine

Cleaning the Drum

Rust left inside the drum by metal articles should be removed immediately with chlorine-free detergent.
Never use steel wool.

Cleaning the Exterior of your Washing Machine

•  Clean the outside of your washing machine with a soft cloth and mild detergent such as kitchen 

detergent.

•  Don’t splash water over the washing machine.
•  Do not use corrosive solvents or cream cleansers, thinners or products containing alcohol or kerosene.

Cleaning the Detergent Drawer

1.  Remove the detergent drawer by pulling and pressing the softener cover at the same time.
2.  Wash out old detergent from the drawer with water. (Use a cloth to clean the washing machine.)

Residual detergent soon builds up if you don’t clean the drawer regularly, and can develop mould.

3.  Replace the drawer.

Cleaning the Door Seal and Window

•  Wipe the window and seal after each wash to remove lint and stains. If lint builds up, it can cause leaks.
•  Remove any coins, buttons and other objects from the door seal after each wash.

•  Always unplug the washing machine before cleaning.

Pull out at the 

same time

Press

•  Don’t put laundry in the washing machine during the drum cleaning.

* All images are for indication only; please refer to your individual unit for actual item.

C510WM13_IB_final_130516_chris.indd   17

16/5/13   11:33 AM

Summary of Contents for C510WM13

























Reviews: