• Always unplug the hair dryer if it is not in use.
• Always grasp the plug when unplugging the unit, never tug at
the mains cable.
• If the unit overheats, select the switch to the ”0” position and
unplug it. Wait until it has completely cooled down before
using again.
• Before you reuse the hair dryer, please make sure the air inlet
and outlet are not obstructed by hair or other objects to avoid
the unit overheating again.
• Do not place the air outlet too close to your hair or skin.
• Never use harsh solvents to clean your hair dryer as these may
damage the unit.
• Do not wind the mains cable around the hair dryer to avoid
damaging the mains cable.
GB-1
GB-2
GB-3
PRODUCT OVERVIEW
OPERATION
1. Choose an easy to reach mains socket to connect your hair dryer
so that you can unplug it immediately in emergencies.
2. The hair dryer may release a small amount of white smoke and a
slight smell when being used for the first time. This is normal and
is harmless to you and will disappear after using a few times.
3. Make sure the power switch is in the “0” position. Plug the unit in
and turn on the power switch.
Your hair dryer provides two different air speeds and overheat
protection.
4. Turning the hair dryer on and select the desired air speed by the
power switch.
• Position “ 0 ” : Off
• Position ” I ” : normal air flow (550W)
• Position ” II ” : strong air flow (1200W)
5. Turn off the hair dryer
Select the power switch to position “0”.
OVERHEAT PROTECTION
Your hair dryer features an auto shut off function that automatically
engages if the unit overheats.
CLEANING
1. Always turn off your hair dryer and unplug it before cleaning it.
2. Remove the hairs and dust on the inlet grille.
3. Clean the unit with a slightly wet cloth then remove any excess
water with a dry cloth.
4. Hang your hair dryer via the loop when it is not in use.
5. A soft day brush may be used to remove dust and hairs from the
air inlet grille, to ensure proper airflow at all times.
HINTS & TIPS
If your hair dryer fails to operate, please check the following:
1. Is the plug plugged into a mains socket properly?
2. Has the unit overheated? (See Overheat Protection for details)
3. Does the power socket work properly? (You can test your hair
dryer with another mains socket)
If the problem still cannot be solved, please contact a qualified
technician. Do not try to repair the appliance yourself.
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to any local regulations.
The following items are included:
If items are missing or damaged, please contact Partmaster (UK
only). Tel: 0870 6001 338 for assistance.
The Main Unit
The Instruction Manual
(P.N.: C12HD10-001)
Air Outlet / Concentrator
1
1
2
3
4
5
Power Switch
2
Air Inlet
3
Hanging Loop
4
Mains Cable
5