32
Model 88 Cable Puller — mounting to Model 8092 Puller Mount
To center cable puller
on puller mount:
Align front and rear brackets
on puller mount with front
and rear brackets on
bottom of cable puller
as
shown.
FIGURE A
FIGURE B
NO
OK
Never tighten chain as shown in Figure A. This causes side loading of the
chain and can result in failure of the chain or screw causing components
to come loose and possibly cause serious injury or death. Figure B
shows the proper alignment of screw and chain for tightening.
WARNING
figure 32
CABLE PULLING BASICS
continued . . .
