Current Solutions InTENSity Select Combo, Instruction Manual, Page: 27 / 44

TENSPros
4.7 Steps to Set a New Program
4.7.1 TENS Setting
Press the [S] button cycle to enter the setting state. The settings
can be adjusted according to the following steps:
1) Set the Therapeutic Program
There are 4 programs in TENS therapeutic
mode available –Burst (B), Normal (N), Pulse
Width Modulation (M), and Pulse Rate
Modulation (M1). The therapeutic program can
be selected by pressing the [
▲
] and [
▼
] button.
When you choose to “B” program, program “B”
outside of the box will be flashing.
2) Set Cycle Time (Optional)
Cycle time is adjustable from 5 to 30 seconds. Only modulation
has this parameter setting. Press [S] button cycle to enter this
menu, and then press the [
▲
]and [
▼
]button to adjusting the
setting.
3) Set Timer
Press [S] button cycle to enter this setting. The treatment time is
adjustable from 1 to 60 minutes or Continuous. Press [
▲
] or [
▼
]
button control to adjust setting. You can set the timer to
“Continuous” mode by pressing the [
▲
] control when it shows 60
minutes. The output will be shut off when time is up.
4) Set Pulse Width
Pulse Width is adjustable from 50 uS to 300 uS. Press [S] button to
enter this menu, then press [
▲
] or [
▼
] button to adjust the setting.
5) Set Pulse Rate
Pulse rate is adjustable from 1 Hz to 150 Hz (0, 5 Hz to 5 Hz for
Burst). Press [S] button cycle to enter this menu, and then press
[
▲
] or [
▼
] button to adjust the setting.
27