Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Hand-E | MODEL V2022
P a g e |
6
Assembly
Handles
1.
Take one of the Handles
(A)
and insert the end with the hole into the Base
Plate hole
(B)
with the holes ready to be aligned (see Figure 1). This will
be a tight interference fit, so you will need to gently tap together using a
hammer/mallet until the holes line up (see Figure 2).
Figure 1
2.
Once the holes are aligned, insert 1 x M12x50mm bolt
(C)
through the hole
and do up the nut. This must be very tight!, then repeate this process for
the other handle.
B
A
Holes to align
A
B
Figure 2
Figure 1
C
