39
1
2
3
Fig.47
Fig.46
Ed. 0722 - 70702562 - REV06 - Valid from serial number21052570 - Giotto - Use and maintenance
CLEANING THE CHAMBER WITH THE
PYROLYSIS FUNCTION
Pyrolysis is a thermochemical crystallization process of food
residues that have deposited in the cooking chamber, which
takes place by bringing the oven up to 400 °C - 725 °F.
Before starting the pyrolysis, remove the coarser
food residues with a natural fibre brush.
Fig.46
1
Touch the
ON/OFF
key (if the oven is off );
2
touch the pyrolysis key;
3
confirm pressing the
key: the heating of the cook-
ing chamber starts until the temperature of 400 °C - 752 °F
is reached, when the function stops and the oven switches
off automatically without you needing to do anything.
To block the function in advance, press the pyrolysis key
again or turn the oven off with the ON/OFF key;
4
in a cold oven, clean the chamber from the crystallized
food residues using a natural fibre brush and then vacuum
with an ash extraction bin.
Fig.47
When the pyrolysis function starts, the room
lights are turned off to preserve them.
CHAMBER CLEANING WITH PYROLYSIS IN "WEEKLY
PROGRAMMING" MODE
It is possible to clean the chamber with pyrolysis as a pro-
grammed event accessing the
programmed switch-on
menu
(see page
28
) and indicating the time when you want pyrol-
ysis to be performed.
Maintenance and cleaning |
CLEANING
Attention, if you program the start of the function:
- at 11:59 pm on Monday, the function will start that day
and at that time;
- at 00:00 the function will always start on Monday, at midnight.
Therefore, if you want to start it at midnight on Tuesday, you must
select the key relating to that day.
Summary of Contents for Giotto GT110
Page 1: ...GT110 GT140 Giotto OVEN Use and maintenance manual ...
Page 2: ...2 ...
