Cuppaz Sleek How To Use And Care For Download Page 6 | Manualshive

Page: 6 / 44

background image

info@ cuppaz.com

hotline: 852 2812 0428

6

The Sleek can be used by children aged from 8 years and above if they have been
given supervision or instruction concerning use of the appliance in a safe way and if

they understand the hazards involved. Cleaning and user maintenance shall not be
made by children unless they are older than 8 and supervised. Keep The Sleek and its
cord out of reach of children aged less than 8 years. Children being supervised not to
play with The Sleek.

Descale the appliance regularly, following the instructions provided. The Sleek may
be damaged if you skip descaling. The Sleek will let you know when to descale.

Clean The Sleek carefully and regularly following the guidelines. If it is not cleaned,
the build-up that forms may be bad for your health. Unplug The Sleek and allow it to
cool before cleaning.

If you do not expect to use The Sleek for a long period of time (leaving on vacation,
etc.), please unplug it.

Thanks for helping us make your experience with The Sleek a safe,
pleasant, and inspiring one by following these safety guidelines!

«
...
4
5
6
7
8
...
»

Summary of Contents for Sleek













































Reviews:

No comments

Related manuals for Sleek

Brand: Caffitaly System Pages: 28

Brand: U-Line Pages: 48

Brand: T-Fal Pages: 20

Brand: Melitta Pages: 28

Brand: Cornelius Pages: 12

Brand: U-Line Pages: 52

Brand: Getinge Pages: 4

Brand: OBH Nordica Pages: 72

Brand: Ice-O-Matic Pages: 2

Brand: Comelec Pages: 6

Brand: Keurig Pages: 7

Brand: ENKHO Pages: 50

Brand: Whirlpool Pages: 2

Brand: Whirlpool Pages: 1

Brand: Whirlpool Pages: 1

Brand: Whirlpool Pages: 2

Brand: Whirlpool Pages: 9

Brand: Whirlpool Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands