Cumdente ApaCare Sonic Toothbrush Instructions For Use And Operation Download Page 3

Page: 3 / 4

Sonic

Professional Sonic Toothbrush

Instructions for use and operation

Please read this information carefully
before using the product and keep it for
further reference.

Status: February 2022

Important safety information

•  Please do not charge near water-bearing devices.
•  The device contains a built-in rechargeable battery.
•  Avoid heat, open flames and magnetic fields.
•  Check device before use.
•  Please do not use defective devices.
•  Do not open the device.
•  Have repairs carried out only by the manufacturer.
•  Exercise caution after dental-surgical therapy.

Wait for 3 months and then consult your dentist before use.

• First-time users may experience discomfort due to the rapid

brush oscillation. This discomfort should disappear after no
more than 2 weeks.

• Children under 8 years of age, patients in need of care or

disabled patients should not use the device without supervision
or use by parents/carers.

Please keep out of reach of children. Toothbrushes are
patientspecific devices. Please do not use them together.

Specifications

ApaCare

Sonic Toothbrush

USB Charger

Voltage:

Power:

Output:

5V, 55mA

Device Voltage

3,7V

Power:

1,2W

Standard:

GB4706.1_2005 GB4706.59-2008

Country of Origin: People‘s Republic of China

Functional description (Mode)

Clean:

Usual daily cleaning

White:

Whitening of teeth, especially for smokers

or when drinking tea or coffee

Polish:

Polishing of the tooth surface

Gumcare:

Gentle gum care

Sensitive:

Gentle mode, especially for sensitive patients

or children

Manufacturer: Ningbo Xoralcare Electronic

Technology Co., LTD
No. 1,Yangming Street Yuyao, Zhejiang, China

Cumdente GmbH
Paul-Ehrlich-Strasse 11
72076 Tübingen, Germany

Scope of delivery

1x Handpiece
2x Brush head with
  protective cover
1x Charging station
  with USB cable and
  power adapter 5V, 1W

Operation

Switch on

Press the switch-on button once. The toothbrush starts the set
mode.

Switch off

Switching off by pressing the function key again after at least 5
seconds of operation. The unit switches off.

Press the function key (Mode) once more after the 5th press. The
unit switches off.

Directions for use

1. Attach the brush head

to the tooth-

brush by slipping it onto the shaft
(see illustration). A gap of 0.5 mm -1
mm remains between the brush head
and the toothbrush housing, which is
required for unhindered oscillation of
the brush head.

2. Apply a small amount of toothpaste

(e.g. ApaCare

toothpaste) onto the

brush head.

3. Place the brush with the brush head

against the row of teeth

and switch

on the toothbrush.

4. Place the brush head at a 45° angle

the teeth and gums and press gently.
Make small circular or oscillating
movements. Do not scrub. Avoid high
contact pressure. Carefully clean all
the teeth of each jaw half in groups
of approx. 3 teeth inside, outside and
on the occlusal surface (After at least
30s per jaw half, „Interval-Timer“
will set in).

5. After use,

rinse the toothbrush

thoroughly with water and store
to dry (without brush cover). Clean
toothbrush shaft regularly after brush
is removed.

6. Brush your teeth in this way at least

2 times a day

7. Replace the brush head at least

every 3 months.

If the bristles become

deformed quickly, be careful not to
use excessive contact pressure hence
avoid premature replacement of the
brush head.

Each brush head

is intended for

individual personal use. It must not
be used by more than one person.
If necessary, label brush heads to
personalize them.

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

1. Rinse it with water and wipe it with a soft
towel. Place it in a ventilated area.
2. Do not immerse it in water for a long time.
3. Do not wash it with water with a temperature
above 40 degrees Celsius or acidic cleaners.

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Do not charge in the bathroom! Do not place the charger
on or near the water containers (such as bathtubs, sinks,
etc.).
The product contains a built-in rechargeable battery, so
please keep away from heat, open flame and magnetic
field to avoid product damage and danger.
Keep it away from knock or drop. Do not continue to use
the brush if it is damaged due to knock or drop.
Do not transform, disassemble or repair it by yourself.
Please check whether the product is in good condition
before using. If it is damaged, please stop using.
Please consult before use and follow your doctor's advice
if you have had oral surgery in the past 3 months.
When it is used for the first time, some people may feel
discomfort due to the high-speed vibration of the bristles.
It is normal. If this condition occurs after 2 weeks, please
stop using and contact with dentist.
Please use our matching brush head to replace.
It is only suitable for cleaning teeth, gum and tongue.
Do not use it for other purposes.
It is not suitable for children under 8 years old.
The disabled, people with mental or sensory impairment,
and people who lack relevant experience and knowledge.
Please place it out of the reach of infants and children.
It cannot be used as a toy.
Do not share it with others.

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Within the EU, this symbol indicates that this
product must not be disposed of with household
waste.
Please dispose of the device via suitable collection
systems.

Charging

1. Fully charge your new toothbrush by plugging it onto the

USB charger (12 hours) (full charge is indicated by the green
indicator light on the charger becoming permanently lit). Do
this also if you have not used the toothbrush in more than 3
months or if the vibration seems insufficient.

2. Place the charging station in a safe, level, dry and cool place

and make sure that it cannot fall into water or onto heat-
bearing surfaces.

3. Plug in the USB charging cable.
4. Place the toothbrush vertically on the charging unit. Switch

off the toothbrush for charging. The indicator light on the
charger flashes during charging.

5.  Do not switch on the toothbrush during charging.
6.  When charging is complete, it is automatically terminated.
7.  A flashing indicator light on the toothbrush shows that the

toothbrush must be recharged.

Cleaning

1. After each use, rinse the brush head

thoroughly under running water and
allow to air dry.

2. Do not pull on the brushes.

3. Remove the brush head from the tooth-

brush at least once a week and clean the
connection points carefully.

4. Clean the toothbrush with running water

and dry, for example with a soft towel.

5. Do not immerse the toothbrush in water

or cleaning agents.

6. Do not use hot water (>40°C), solvents or

alkaline cleaning agents for cleaning.

7. Wipe the charging station with a soft

cotton cloth and clean the metal contacts
with a dry cotton cloth every 6 months.

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Specification

Name: Sonic Electric Toothbrush

USB Charger

Rated voltage: 5V
Rated power:1W
Rated output:5V 55mA

Host

Rated power: 1.2W

Rated voltage: 3.7V

Carried standard:GB4706.1-2005 GB4706.59-2008
Place of origin: Zhejiang Province, China

Drawing

Host

Dust Cover

Brush head

Charger

Function description

Day-to-Day Cleaning，It is suitable for the general
population.

Clean

Brightening Teeth，It is suitable for people who
smoke, and drink tea and coffee.

White

Polish

Removing Tartar，Polish the surface of enamel
surface circularly.

Gumcare

Protecting Gums，Clean your mouth while protecting
your gums.

Sensitive

Noob Mode,It is suitable for first-time users or
children.

Modes

Starting Up

Press switch once and then it starts working.

Turning Off

① Press again to switch off after turning on it for 5 seconds.

②

Press again to switch off after switching it to the fifth

mode.

Mode Selection

Press the switch successively and switch in order to select
suitable brushing mode.

Mode Memory

After selecting one brushing mode for 5 seconds, it will be
automatically memorized. If you turn the toothbrush off at
this time, the mode will be automatically selected next
time.

Step

1.Tighten the toothbrush head on the

shaft in the light of the above figure.

There is a gap of 0.5-1mm between the

toothbrush head and the handle end.

It is required for the normal vibration

of the brush head.

To avoid splashing toothpaste,

please take a small amount of
toothpaste on the brush before use.

3.Soak it, then put it in the mouth
and finally start the switch.

4.Tilt the bristles for 45 degrees and

gently press the brush in the junction

of the tooth and gums and move slowly.

5.According to every 30 seconds

changing reminder, please gently move

the brush head in the mouth, do not

press or rub the brush too hard against

the teeth.

6.After use it is advisable to rinse
your mouth.

Timing

30S for

the top left area

30S for

the top right area

30S for

the Lower left area

30S for

the lower right area

Left

right

down

It is recommended to brush your teeth twice a day for 2 minutes.

There is a brief pause every 30 seconds when using the product,

which reminds you to change cleaning area. It can balance the

four-area cleaning so as to achieve scientific cleaning effect.

Charging

Before using it for the first time, please start the toothbrush first.If there

is residual power, please use it up and then recharge. This product

adopts an USB inductive charging mode. You only need to place the

toothbrush on the standard charging base that is connected to the

USB socket for charging.

Steps for usage as follows:

1.Please put the charging base in a safe, level, dry and cool place so

as not to fall into the water or high temperature environment.

2.Plug in a USB plug.

3.Place the grip button vertically outwards into the cradle and the

charge indicator lights (flashes) to indicate that charging is in progress.

Charging tips:

1.During the charging process, the LED charging indicator light flashes,

indicating that the battery is charging. After the battery is fully charged,

the charging indicator is on not flash, indicating that the battery is full,

and the product is fully charged in about 12 hours.

Tips:

1.It takes about 12 hours for the product to be fully charged.

2.Always charge the toothbrush under the following conditions:

a. Have not been used for more than about three months;

b. The vibration is weak in using the toothbrush.

Important safety tips

Cleaning and maintenance

Clean the brush head:

1. Clean the bristles and brush heads after each

use and naturally dry.

2. Do not pull the bristles, it will make it easy to

deform, resulting in loss.

3. It is recommended to remove the brush head

from the handle at least once a week to flush the

brush head connection.

Clean the toothbrush body:

Charging base:

1. Wipe the charger with a soft cloth.
2. Wipe the metal part of the power plug with a
dry cloth every 6 months to preventdust
accumulation and poor contact.

Replace the brush head:

1.It is recommended to change the brush head
every three months.
2.Resulting in bending of the bristles due to
excessive force, replace the brush head in time.

Fault diagnosis

Fault

Cause analysis

Elimination method

Reduced
vibration
intensity

It can only

work for a

short time

even if the

toothbrush

has been

charged.

Toothbrush
stop work

1.Toothbrush is

pressed strongly

against teeth.

Please contact our customer ser

vice

whenever you have any questions.

Thank you for choosing us

To respected users:

Thank you for using our product! We will provide you with related

after-sales service after ensuring your purchase certificate according

to the relevant policies on the warranty card.
Warranty Details:

1. The warranty period starting from the date of purchase is 1 year.

2.When it refers to the flaws caused by materials and production

process during the warranty period, we will replace toothbrush

parts or entire toothbrush in the light of particular cases.

Note: The warranty product includes the toothbrush body but

excludes first-rate consumables like brush.

3.The following conditions are not covered by the warranty:

⑴

The product has been used incorrectly, or it has been damaged

due to your own disassembling and repairing.

⑵

Man-made damage

⑶

Damage due to irresistible causes (such as natural disasters,

fires, etc.).

⑷

The aging, bruising, and scratches on the product surface.

⑸

Damage caused by non-family use (e.g., industrial and

commercial use).

4、Repair services beyond the warranty will be properly charged

according to regulations.

5、For any questions regarding maintenance services or

consulting, please consult the after-sale customer service center.

Warranty card

Ltem

：

Model No

：

Date

Purchase

：

Name

：

Mobile

：

Address

：

Fault Description

：

Please fill in your information, please send this card together with

maintenance products together to send back to my company service

center.

white

sensitive

30s

左上区域

右上区域

左下区域

右下区域

左

右

上

下

gumcare

polish

clean

Charging
indicator

Switch

Matters needing attention

Before using the product, please read this Instruction
manual carefully and keep it for future reference.

2.The toothbrush

head is too close

to the main engine.

1.Put the toothbrush head

on the teeth gently.

2.Remove the toothbrush

head from the handle and

put it on the metal shaft

again

1.The main engine

is not placed

vertically on the

charger resulting in

no charging

2.Insufficient

powers

The charging time is not

enough.

2.It has not been used for

more than 6 months

3.The service life of

battery is over.

1.The toothbrush is

out of battery.

2.Toothbrush

malfunction

1.Please charge. Put the

main engine vertically on

the charger to make its

bottom to contact with

the charger and confirm

the red light

2.After-sales Consulting

and Repairing

Remarks

2.You should turn it off before charging, otherwise it cannot be charged.

3. Do not turn on the on-off switch after the charging mode is entered.

Based on the charging protection design, the product will be

automatically disconnected after the completion of charging.

Based on the low battery alert, when the battery is about to run out,

the battery indicator will flash, prompting you to charge the toothbrush.

展开

195x165mm

折叠

65x165mm

sonic toothbrush

Instruction Manual

Please read the instructions carefully

before using the product

Summary of Contents for ApaCare Sonic Toothbrush

Page 1: ...arging otherwise it cannot be charged 3 Do not turn on the on off switch after the charging mode is entered 4 Based on the charging protection design the product will be automatically disconnected after the completion of charging 5 Based on the low battery alert when the battery is about to run out the battery indicator will flash prompting you to charge the toothbrush Please read the instructions...

Page 2: ... 3 Selbstverschuldete Beschädigungen 4 Schäden in Verbindung mit höherer Gewalt Brand Natur katastrophen 5 Bei Gebrauchsspuren oder Kratzer an der Oberfläche 6 Beschädigungen durch nicht bestimmungsgemäßen Gebrauch z B industriellen Einsatz 7 Reparaturen oder Service nach der Garantiezeit sind kosten pflichtig 8 Für alle Fragen wenden Sie sich bitte an den ApaCare Kundenservice mail apacare de ode...

Page 3: ... is entered 4 Based on the charging protection design the product will be automatically disconnected after the completion of charging 5 Based on the low battery alert when the battery is about to run out the battery indicator will flash prompting you to charge the toothbrush Please read the instructions carefully before using the product Name Sonic Electric Toothbrush USB Charger Rated voltage 5V ...

Page 4: ... Damage after attempting to open the device by yourself or attempting to repair the device by yourself 3 Self inflicted damage 4 Damages related to force majeure fire natural disasters 5 In case of signs of wear or scratches on the surface 6 Damage due to improper use e g industrial use 7 Repairs or service after the warranty period will be charged 8 For all questions please contact the ApaCare cu...

Search results

Summary of Contents for ApaCare Sonic Toothbrush

Reviews:

Related manuals for ApaCare Sonic Toothbrush

Brands by name

Popular brands

Cumdente ApaCare Sonic Toothbrush, Instructions For Use And Operation

Search results

Summary of Contents for ApaCare Sonic Toothbrush

Reviews:

Related manuals for ApaCare Sonic Toothbrush

Brands by name

Popular brands