14
VLC-4 rev.02
VLC-4
Peak Cycle —
This is the time required to
perform a complete light peak cycle. It must
be longer than the peak's du peak
s peak sunset. Refer to the previ-
ous graph.
Peak Duration —
This is the delay during over
which the peak’s intensity is maintained. It
ranges from 1 to 59 minutes.
Peak's Intensity —
This is the light intensity
of a peak. It ranges from 0 to 100% and must
be higher than the standard light intensity.
Peak's Sunrise / Sunset —
This is the period
of time over which the light intensity gradu-
ally increases (or decreases) in a light peak.
The sunrise and sunset delay of a light peak
ranges from
1
to 60 minutes.
6.5.
Manual/Automatic Mode
The manual mode can be enable anytime
if you need to change the light intensity in
the house.
Note that the red LED display at the top right
corner of the controller always shows the
light intensity of the ongoing light program
(it never shows the light intensity selected
in manual mode).
1. Select the following menu items:
» MANUAL MODE
Manual Mode
Auto On
Intensity 0
Manual Off
Intensity 0
Back to Auto
Yes
Minutes to Auto
15
2. Set the following parameters:
Auto —
The automatic mode's On/Off status
is displayed and cannot be modified. This
status is related to the manual mode status,
i.e. if the manual mode is activated the au-
tomatic mode is automatically disabled and
vice versa.
Intensity —
This is the light intensity of the
ongoing light program. This value is displayed
as a reading and cannot be modified.
Manual—
Select "On" to enable the manual
mode or "Off" to go back to the automatic
mode.
Intensity —
Select the desired light inten-
sity of the manual mode. It ranges from 0
to 100%.
Back to Auto —
Select "Yes" if you want the
controller to switch back to the automatic
mode after a certain period of time.
Minutes to Auto —
Select after how many
minutes the controller must switch back to
the automatic mode.
11
VLC-4 rev.02
VLC-4
24h Lights with Peaks
Note that the peak cycle must com-
pletely fit in the light cycle in order to be
performed (the peak's sunset must end
before the end of the light cycle).
Light
Intensity
Peak
Intensity
Standard
Intensity
Minimum
Intensity
Program
Starts
Program
Ends
Peak Cycle
Peak
Sunrise
Peak
Sunset
Duration
Time
• Lights on 24 hours:
With the
"Light on 24h"
option, the lights are
always lit at their standard intensity during
the whole program.
Light
Intensity
Peak
Intensity
Standard
Intensity
Minimum
Intensity
Start Time
Peak
Cycle
Stop Time
Time
Light
Cycle
Incomplete
peak cycle. The
light peak is
not performed.
Peak
Cycle
Incomplete Peak Cycle
