Cumberland
1004 E. Illinois St.
Assumption,IL 62510
PHONE 1-217-226-4421
FAX 1-217-226-4420
Manual Part No. 4801-5323 Rev 1-2015 Page
8
of
12
MEGA
-FLOW CON FAN
Fan & Cone Installation
Mounting Brackets
7. Attach Cone
a.
Install the cone Mounting Brackets to the fan housing using two 5/16-18x1/2” carriage bolts in each
mounting bracket.
NOTE:
Make sure bottom panel with drain hole is closest to the ground.
b.
Bend the mounting brackets back slightly to help clear the area of the cone edges. Mount cone to fan.
Hang the centered slot in the small end of the cone over the Pim screw mounted on the Fan housing. See
Figure 9
. Screw can be fastened with ¼”x20 lock nut, if necessary (not included).
Nuts on outside of
cone assembly
Figure 8
Figure 7
Cone attaches over
the top Pim screw
Figure 9: Install Cone Mounting Brackets
