7. Installation
58
PNEG-250
Pan Feeders
Hopper Assembly
The head of the bolts should be to the inside of the hopper to help prevent feed from bridging.
The boot can be suspended by boot hangers for better support. To order boot hangers or to learn more
about boot hangers, contact your Cumberland dealer.
Use the bottom hole only on the top of the hanger brackets to bolt them together. The top hole is to be
used to suspend the hopper with an “S-Hook” or hopper adjustment kit.
1. Assemble the hopper panels with the side flanges on the outside of the hopper.
2. Install the cover, hopper brace and hanger brackets at the top of the hopper.
Figure 7CN
3. Slide the assembled hopper onto the top of the boot.
4. Secure the hopper to the boot by inserting the pin from the boot through the holes in the hopper
bottom flange and boot top flange as shown in
.
5. Feed agitation: Most feed will fall through the hopper and boot without agitation. For feed that
require agitation, a “cannon ball” agitator is provided. The cannon ball simply rests on the auger
inside the boot.
Figure 7CO
Be careful, there are many sharp edges that can cut while assembling the
feedline. Wear protective clothing and gloves.
Pin
Summary of Contents for Hi-Lo
