10
4802-0103
Curt-O-Matic Installation
3. Installation
Figure 3A Curt-O-Matic III
Inside
Winches mounted on the post inside house:
Curt-O-Matic should be mounted at least 16" above the winch. Mount the winch release lever (11) as
shown in
Place the cable loop (7) in the Curt-O-Matic load slot.
1
2
4
5
3
6
Ref #
Description
1
Power
2
Expansion Finger
3
Load Slot
4
Trip Arm Assembly (Includes Finger)
5
Alarm Switch (CM-III Model only)
6
Wires to Alarm Input (CM-III Model only)
DO NOT secure the winch handle J-Hook to the winch handle. The winch handle
should ONLY be resting in the J-Hook.
DO NOT over-tighten the winch release lever mounting screw to the wall.
DO NOT mount the Curt-O-Matic on any flammable surface.
Use ONLY accessories and hardware supplied by Cumberland.
