manualshive.com logo in svg

CULLMANN CUlight FR 60C, Manual

Share
Download
CULLMANN CUlight FR 60C Manual Download Page 42

86

Firmware Upgrade

This flash supports firmware upgrade through the USB port. 

Update information will be released on our official website.

Maintenance

•  Shut down the device immediately should abnormal operation 

be detected.

•  Avoid sudden impacts and the product should be dedusted 

regularly.

•  It is normal for the flash tube to be warm when in use. Avoid 

continuous flashes if unnecessary.

•  Maintenance of the flash must be performed by our authorized 

maintenance department which can provide original acces-

sories.

•  This product, except consumables e.g. flash tube, is supported 

with a one-year warranty.

•  Unauthorized service will void the warranty.
•  If the product had failures or was wetted, do not use it until it is 

repaired by professionals.

•  Changes made to the specifications or designs may not be 

reflected in this manual.

USB connection line is not included in this product. The 

USB port is a standard Micro USB socket. Common USB 

conncection line is applicable.

Compatible Camera Models

This flash unit can be used on the following Canon EOS series 

camera models:

Camera models …

5D Mark III 5D Mark II 6D 7D 60D 50D 40D 30D

650D 600D 550D 500D 450D 400D Digital 1100D 1000D

1DX

This table only lists the tested camera models, not all 

Canon EOS series cameras. For the compatibility of other 

camera models, a self-test is recommended.
Rights to modify this table are retained.

Declaration of Conformity

CULLMANN GERMANY GmbH herewith declares, that this 

device is in compliance with the basic requirements and all other 

applicable regulations of the directive 1999/5/EC. You find the 

declaration of conformity acc. to the R&TTE directive 1999/5/EC 

under www.cullmann.de.

616x0_CUlight_FR60X_BDA_Canon englisch.indd   86

24.10.2016   13:56:36

Summary of Contents for CUlight FR 60C












































Reviews:

No comments

Brands by name

Popular brands

Load more brands