manualshive.com logo in svg

CULLMANN CUlight FR 60C, Manual

Share
Download
CULLMANN CUlight FR 60C Manual Download Page 13

57

 High-Speed Sync

High Speed Sync (FP flash) enables the flash to synchronize with 

all camera shutter speeds. This is convenient when you want to 

use aperture priority for fill-flash portraits.

1

  Press Function Button 2 

< 

        

SYNC

 > so that <   >  is 

displayed.

2

  Check that <   > is displayed 

in the viewfinder.

•  If you set a shutter speed that is the same as or slower 

than the camera’s maximum flash sync speed, <   >  will 

not be displayed in the viewfinder.

•  With high-speed sync, the faster the shutter speed, the 

shorter the effective flash range.

•  To return to normal flash, press < 

        

SYNC

 > button again. 

Then <   > will disappear.

•  Multi flash mode cannot be set in high-speed sync mode.
•  Over-temperature protection may be activated after 15 

consecutive high-speed sync flashes.

  Second-Curtain  Sync

With a slow shutter speed, you can create a light train following 

the subject. The flash fires right before the shutter closes.

Press function button 4 

< 

        

SYNC

 > so that < 

 >  is 

displayed on the LCD panel.

Press function button 3 

       

1

<

          

 >. The icon <  

      

> 

and the exposure bracketing 
amount will be highlighted on 
the LCD panel.

Press < 

SET

 > button again 

3

to confirm the setting. Then 
your 

FEC

 and 

FEB

 settings 

are displayed on the LCD 
panel.

●

FEB will be cancelled after three photos are taken. 

●

 

For best results, set the camera drive mode to “single” and 
ensure the flash is ready before shooting.

●

 

FEB can be used with FEC and FEL.

           You can prevent the FEB from being cancelled 

automatically after three photos are taken. (C.Fn-
FEB ACL , Page 74)

           The FEB shooting sequence can be changed. (C.Fn-

FEB, Page 74)

C.Fn

FEB

Set the flash exposure 

2

compensation amount.

● 

Turn the Select Dial to set 
the amount.

● 

“0.3”means 1/3 step, 
“0.7”means 2/3 step.

C.Fn

FEL: Flash Exposure Lock

FEL

 

can lock the correct flash exposure setting for any part of the 

scene.  With  <

ETTL

>  displayed  on  the  LCD  panel,  press  the 

camera’s  <

FEL

>  button.  If  the  camera  does  not  have  the  <

FEL

> 

button, press the < 

*

 > button.

Focus the subject.

1

Press the <

FEL

> button.

2

● 

Aim the subject at the center of 

the viewfinder and press <

FEL

> 

button.

● 

The camera flash will fire a 

preflash and the required flash 

output for the subject is retained 

in memory.

● 

Each time the <

FEL

> button is 

pressed, a preflash will be fired 

and a new flash exposure 

setting will be locked.

●

 If the subject is too far away and underexposure, the <    > 

icon will blink in the viewfinder. Move closer to the subject 
and try the FE lock again.

●

 If <

ETTL

> is not displayed on the LCD panel, FE lock 

cannot be set.

●

 If the subject is too small, FE lock might not be very 

effective.

●

 If you set a shutter speed that is the same as or slower than 

the camera’s maximum flash sync speed, <      > will not be 
displayed in the viewfinder.

●

 With high-speed sync, the faster the shutter speed, the 

shorter the effective flash range. 

●

 To return to normal flash, press < 

        

 > button again. Then 

<      > will disappear.

●

 Multi flash mode cannot be set in high-speed sync mode.

●

 Over-temperature protection may be activated after 15 

consecutive high-speed sync flashes.

High-Speed Sync

High Speed Sync (FP flash) enables the flash to synchronize with all 
camera shutter speeds. This is convenient when you want to use 
aperture priority for fill-flash portraits.

       

Second-Curtain Sync

With a slow shutter speed, you can create a light train following the 
subject. The flash fires right before the shutter closes.

Press function button 4 <

           

> 

button so that <    

    

> is displayed 

on the LCD panel.

Press Function Button 2 

    

1

< 

          

> so that <  

     

 > is 

displayed.

Check that <

       

> is 

2

displayed in the viewfinder.

SYNC

SYNC

SYNC

- 49  -

-  50  -

R

Press function button 3 

       

1

<

          

 >. The icon <  

      

> 

and the exposure bracketing 
amount will be highlighted on 
the LCD panel.

Press < 

SET

 > button again 

3

to confirm the setting. Then 
your 

FEC

 and 

FEB

 settings 

are displayed on the LCD 
panel.

●

FEB will be cancelled after three photos are taken. 

●

 

For best results, set the camera drive mode to “single” and 
ensure the flash is ready before shooting.

●

 

FEB can be used with FEC and FEL.

           You can prevent the FEB from being cancelled 

automatically after three photos are taken. (C.Fn-
FEB ACL , Page 74)

           The FEB shooting sequence can be changed. (C.Fn-

FEB, Page 74)

C.Fn

FEB

Set the flash exposure 

2

compensation amount.

● 

Turn the Select Dial to set 
the amount.

● 

“0.3”means 1/3 step, 
“0.7”means 2/3 step.

C.Fn

FEL: Flash Exposure Lock

FEL

 

can lock the correct flash exposure setting for any part of the 

scene.  With  <

ETTL

>  displayed  on  the  LCD  panel,  press  the 

camera’s  <

FEL

>  button.  If  the  camera  does  not  have  the  <

FEL

> 

button, press the < 

*

 > button.

Focus the subject.

1

Press the <

FEL

> button.

2

● 

Aim the subject at the center of 

the viewfinder and press <

FEL

> 

button.

● 

The camera flash will fire a 

preflash and the required flash 

output for the subject is retained 

in memory.

● 

Each time the <

FEL

> button is 

pressed, a preflash will be fired 

and a new flash exposure 

setting will be locked.

●

 If the subject is too far away and underexposure, the <    > 

icon will blink in the viewfinder. Move closer to the subject 
and try the FE lock again.

●

 If <

ETTL

> is not displayed on the LCD panel, FE lock 

cannot be set.

●

 If the subject is too small, FE lock might not be very 

effective.

●

 If you set a shutter speed that is the same as or slower than 

the camera’s maximum flash sync speed, <      > will not be 
displayed in the viewfinder.

●

 With high-speed sync, the faster the shutter speed, the 

shorter the effective flash range. 

●

 To return to normal flash, press < 

        

 > button again. Then 

<      > will disappear.

●

 Multi flash mode cannot be set in high-speed sync mode.

●

 Over-temperature protection may be activated after 15 

consecutive high-speed sync flashes.

High-Speed Sync

High Speed Sync (FP flash) enables the flash to synchronize with all 
camera shutter speeds. This is convenient when you want to use 
aperture priority for fill-flash portraits.

       

Second-Curtain Sync

With a slow shutter speed, you can create a light train following the 
subject. The flash fires right before the shutter closes.

Press function button 4 <

           

> 

button so that <    

    

> is displayed 

on the LCD panel.

Press Function Button 2 

    

1

< 

          

> so that <  

     

 > is 

displayed.

Check that <

       

> is 

2

displayed in the viewfinder.

SYNC

SYNC

SYNC

- 49  -

-  50  -

R

616x0_CUlight_FR60X_BDA_Canon englisch.indd   57

24.10.2016   13:55:40

Summary of Contents for CUlight FR 60C












































Reviews:

No comments

Brands by name

Popular brands

Load more brands