CULLMANN CUlight FR 60C Manual Download Page 32

Page: 32 / 43

Auto Flash Shooting with Three Slave Units

Setting the slave group
<C>.

• Use the same method of

step 1 (Page 75) to set the

slave unit of flash

Einstellung <RATIO A:B C>.

• Use the same method of

step 1 and step 3 (Page 75)

to set the master unit as

RATIO A:B C

Setting flash exposure
compensation.

• Use the same method of

step 1 (Page 75) to set the

slave unit of flash group

• Press Function

Button 2

>. Turn the Select

Dial to set the amount of

flash exposure compen-

sation and press <

SET

button to confirm.

About Slave Group Control

If three slave units are all set to

> in terms of slave ID, these

slave units will be controlled as

if they were one camera flash in

slave group A.

• When setting < RATIO A:B C >, Group A, B und C will

fire a flash synchronously; when setting< RATIO A:B >,

Group C will not fire a flash.

• If shooting under the situation that group C is toward the

main shooting subject, over exposure might occurred.

• In some EOS film cameras that support E-TTL autoflash,

you cannot perform multiple flash wireless shooting with

a flash ratio setting.

• The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to

1:1 to 1:3 (1/2 step increment).

• The details of the flash ratio settings are as follows.

1:8

8:1 4:1 2:1 1:1 1:2 1:4

5.6:1 2.8:1 1.4:1 1:1.4 1:2.8 1:5.6

Auto Flash Shooting with Three Slave Unit

Setting <RATIO A:B C>.

●

Use the same method of

step 1 and step 3 (Page
68) to set the master unit
as <

RATIO A:B C

Setting the slave group

<C>.

●

Use the same method of
step 1 (Page 68) to set the
slave unit of flash
group<

Setting flash exposure

compensation.

●

Use the same method of
step 1 (Page 68) to set the
slave unit of flash
group<

●

Press Function Button 2
<

>. Turn the Select

Dial to set the amount of
flash exposure
compensation and
press<

SET

> button to

confirm.

About Slave Group Control

If three slave units are all set to
<

> in terms of slave ID, these

slave units will be controlled as if
they were one camera flash in
slave group A.

●

When setting <

RATIO A:B C

>, group A, B and C will fire a

flash synchronously; when setting<

RATIO A:B

>, group C

will not fire a flash.

●

If shooting under the situation that group C is toward the

main shooting subject, over exposure might occurred.

●

In some EOS film cameras that support E-TTL autoflash,

you cannot perform multiple flash wireless shooting with a
flash ratio setting.

●

The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1
to 1:3 (1/2 step increment).

●

The details of the flash ratio settings are as follows.

8:1

4:1

2:1

1:1

1:2

1:4

1:8

5.6:1

2.8:1

1.4:1

1:1.4

1:2.8

1:5.6

6. M: Wireless Flash Shooting with Manual Flash

This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.

Setting the number of flash

groups.

●

When <

> is

displayed, press the
Function Button 2
<

> to set the

groups to fire.

●

The setting changes as
follows each time you
press the button:
ALL(RATIO OFF)→
A/B(RATIO A

B)→

A/B/C(RATIO A

Setting the flash mode to

<M>.

RATIO

Setting flash output.

●

Press Function Button 3
<

>. Turn the Select

Dial to set the flash output
of the groups. Press
<

SET

> button to confirm.

Taking the picture.

●

Each group fires at the set
flash ratio.

●

When ALL <

RATIO OFF

> is set, set A, B or C as the firing

group for the slave units.

●

To fire multiple slave units with the same flash output,
select ALL <

RATIO OFF

> in step 2.

Setting <M> Flash Mode

You can directly operate the slave unit to manually set the manual
flash or stroboscopic flash.

Setting the slave unit.

Setting flash mode to <M>.

●

Press <

MODE

> button so

that <

> is displayed.

●

Set the manual flash

output. (Page 51)

MENU1

Slave Group A

Multi: Wireless Flash Shooting with Manual Flash

Setting <MULTI> stroboscopic
flash.

●

Press <

MODE

> button so that

MULTI

> is displayed.

●

Setting the stroboscopic flash.
(Page 52)

- 69 -

- 70 -

Auto Flash Shooting with Three Slave Unit

Setting <RATIO A:B C>.

●

Use the same method of

step 1 and step 3 (Page
68) to set the master unit
as <

RATIO A:B C

Setting the slave group

<C>.

●

Use the same method of
step 1 (Page 68) to set the
slave unit of flash
group<

Setting flash exposure

compensation.

●

Use the same method of
step 1 (Page 68) to set the
slave unit of flash
group<

●

Press Function Button 2
<

>. Turn the Select

Dial to set the amount of
flash exposure
compensation and
press<

SET

> button to

confirm.

About Slave Group Control

If three slave units are all set to
<

> in terms of slave ID, these

slave units will be controlled as if
they were one camera flash in
slave group A.

●

When setting <

RATIO A:B C

>, group A, B and C will fire a

flash synchronously; when setting<

RATIO A:B

>, group C

will not fire a flash.

●

If shooting under the situation that group C is toward the

main shooting subject, over exposure might occurred.

●

In some EOS film cameras that support E-TTL autoflash,

you cannot perform multiple flash wireless shooting with a
flash ratio setting.

●

The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1
to 1:3 (1/2 step increment).

●

The details of the flash ratio settings are as follows.

8:1

4:1

2:1

1:1

1:2

1:4

1:8

5.6:1

2.8:1

1.4:1

1:1.4

1:2.8

1:5.6

6. M: Wireless Flash Shooting with Manual Flash

This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.

Setting the number of flash

groups.

●

When <

> is

displayed, press the
Function Button 2
<

> to set the

groups to fire.

●

The setting changes as
follows each time you
press the button:
ALL(RATIO OFF)→
A/B(RATIO A

B)→

A/B/C(RATIO A