36
FEC: Flash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd
stops. It is useful in situations where minor adjusting of the TTL
system is needed based on the environment.
Setting FEC:
1
Press the
SET
Button and
the flash exposure compen-
sation amount will be high-
lighted on the LCD panel.
2
Turn the Select Dial to set
the amount.
•
“0.3”means 1/3 step,
“0.7”means 2/3 step.
•
To cancel the flash expo-
sure compensation, set
the amount to “+0”.
3
Press <
SET
> button again
to confirm the setting.
High-Speed Sync
High Speed Sync (FP flash) enables the flash to synchronize with
all camera shutter speeds. This is convenient when you want to
use aperture priority for fill-flash portraits.
Choose the < > button:
Press the <SYNC> button to turn on high-speed sync function.
• With high-speed sync, the faster the shutter speed, the
shorter the effective flash range.
• Multi flash mode cannot be set in high-speed sync mode.
• Over-temperature protection may be activated after 15
consecutive high-speed sync flashes.
• Try to avoid using high-speed sync flash, which will cut
short flash tube’s lifetime.
Second-Curtain Sync
With a slow shutter speed, you can create a light train following
the subject. The flash fires right before the shutter closes.
Press the <
SYNC
> button then the <
> icon displayed on the
panel. The flash will without second-curtain sync function in the
Multi mode and in the wireless mode.