41
2
Press the <
SET
> button to
confirm.
5. TTL: Fully Automatic Wireless
Flash Shooting
Autoflash Shooting with One Slave Unit
1
Master Unit Setting
•
Attach a CUlight FR 36C
camera flash on the cam-
era and set it as the mas-
ter unit. (Page 39)
•
A/B/C
can be set as
TTL
mode independently.
2
Slave Unit Setting
•
Set the CUlight FR 36C
that to be controlled as
the wireless slave unit.
(Page 40)
•
The slave unit can be set
as
A/B/C
.
3
Check the communica-
tion channel
•
If the master unit and slave
unit(s) are set to a different
channel, set them to the
same channel. (Page 40)
4
Position the camera and
flashes
•
Position the camera and
flashes as the picture
shows. (Page 43)
5
Check the flash operation
•
Press the master unit’s
Test Button< >.
•
Then, the slave unit will
fire. If not, adjust the slave
unit’s angle toward the
master unit and distance
from the master unit.
• The slave unit might be out of order or fire an unwanted
flash due to the nearby wifi routers or other 2.4G equip-
ments. If in this case, please adjust the flash’s channel or
turn off the 2.4G equipments.
