3
INTRODUCTION
Clean the machine thoroughly before and after each use following the cleaning instructions below.
ELECTRICAL REQUIREMENTS
Plug the warmer into a grounded outlet with correct voltage and sufficient power capacity. Refer to the
product label (serial plate) on the warmer for voltage and wattage requirements.
SAFETY INSTRUCTIONS
POWER MUST BE DISCONNECTED AT THE POWER SOURCE BEFORE ANY SERVICE IS PERFORMED
.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury.
The equipment should be touched only at intended handles and gripping surfaces, while using
additional heat protection, like gloves. Surfaces other than the intended gripping surfaces should get
sufficient time to the cool down before being touched.
This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep
combustible materials, such as drapes and other furnishings, away from the appliance.
Extreme caution is necessary when equipment is used near children or whenever equipment is left
unattended.
Always unplug the appliance when it is not in use and before cleaning, adjusting or maintaining this
machine. To disconnect the appliance, turn the switch off and remove the plug from the power source.
If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or a similarly
qualified person in order to avoid a hazard.
Do not operate any appliance with a damaged cord or plug after the appliance malfunctions or has been
dropped or damaged. Return the appliance to an authorized service facility for examination, electrical or
mechanical adjustment or repair.
Do not use outdoors. This appliance is not intended for wet or moist locations. Never use or store the
appliance where it may fall into water.
Connect to properly grounded outlets only. Avoid the use of extension cords. Do not run the cord under
carpeting, runners or the like. Arrange the cord away from traffic areas where it will create a tripping
hazard.
To prevent a possible fire, it is recommended that the unit is placed on a non-combustible surface.
This appliance has electrical parts. Do not use it in areas where gasoline, paint, or flammable liquids
are used or stored.
