9.Do not use attachments or accessories
which are not recommended by the
manufacture , They my cause
malfunction or injury.
10.Do not attempt to replace the
power cord on this appliance.
This should only be carried out
by authorized service personnel
with specialist tools.
11.Store the appliance away form
direct sunlight and out of the reach
of children.
12.There are no user serviceable
parts in your appliance unauthorized
dismantling or servicing will void
the product warranty.
13.This appliance is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
14.Children should be supervised to
insure that they do not play with the
appliance.
Before using blender:
Remove all packaging material
before using blender for the first
time. Wash the sports bottle and
cress blades assembly before first
use in warm soapy water. Wipe the
blender base with damp cloth.
General Blending :
1.Place the blender on a level surface,
indoors.
Warning
: Do not operate the blender
when the sports bottle is empty.
2.When placing your desired food
ingredients into the sports bottle, be
sure to always begin with at least 200
ml of liquid, before solid ingredients.
3.Once liquid has been added to the
sports bottle, place your solid ingredients
in, making sure not to fill pass the 600ml
mark.
4.Then top-up the sports bottle with
liquid until all solid food has been
covered, making sure not to fill over the
600 ml mark with liquid.
5.When the sports bottle is full, screw on
cross blade assembly firmly.
Tip
: It may be necessary to remove and
clean the rubber gasket in the blade
assembly after each use. To replace
gasket run your finger around the gasket
until it is firmly in place. Do not operate
blender without gasket.
6.With the power base unit on the bench
top and the unit plugged in, you are now
ready to lock the sports bottle into place
using the safety locking system.
7.Place the filled sports bottle onto the
power base, and then line up the arrow on
the blade assembly, so it is pointing to the
‘Un-Locked” padlock.
Operating Instruction
10
