
69
Problem
Cause
Remedy
Low quality froth
• Froth nozzle is dirty.
• Clean froth nozzle: see section
6 .12 .
• Milk system is dirty.
• Clean milk system: see section
6 .4 .
• Steam outlet of the
coffee machine is
blocked.
• Descaling the coffee machine:
see section
6 .11 .
• Milk too warm, too old
or fat content too high.
• Use cold, low-fat milk.
Display shows “Water
tank empty” even
though the tank is full
• Air in system.
• Dispense a little hot water:
see section
4 .5 .
• Water tank walls and
shaft contaminated with
limescale.
• Clean inner and outer walls of
water tank and the inner wall of
the water tank shaft with a brush
and descaling solution.
• Water system clogged.
• As a precautionary measure,
run the cleaning or descaling
program: see sections
6 .10 and
6 .11 .
“Water tank is empty”
does not appear in
the display despite an
empty water tank.
• Too much moisture in
the water tank shaft.
• Unplug the appliance.
• Remove water tank and dry off
thoroughly. Dry the water tank
shaft thoroughly on the inside.
“Empty waste
container” is displayed
to early.
• Waste container was
emptied while the coffee
machine was switched
off.
• Empty the waste container only
when the coffee machine is
switched on.
Summary of Contents for Veloce EM1000U
Page 1: ...Veloce EM1000U...
Page 75: ...www cuisinart co uk IB 18 343...