4
4.
LOW
Choose Low speed to blend
ingredients to desired
consistency. Blue LED light
indicates Low speed is active.
5.
HIGH
Choose High speed to
blend ingredients to desired
consistency. Blue LED lights
indicate which speed you are
using once selected.
6.
ICE CRUSH
Preset to crush ice in seconds.
7.
PULSE
Allows you to pulse at High or Low speeds.
LED will flash blue when selected.
8.
COUNT UP/DOWN TIMER
Controls and displays operating times.
HELPFUL REMINDERS
• Cover should always be in place while the unit is on. Make sure the cover is
properly aligned.
•
Warning:
Do not place blender jar onto jar pad while motor is running.
• Add liquid ingredients first, then follow with solid ingredients, then frozen
ingredients. This will provide more consistent blending and prevent
unnecessary stress on the motor.
• Boiling liquids should cool for 5 minutes before being placed in blender jar.
• Follow Cleaning and Maintenance instructions on page 6 prior to your
first use.
OPERATION
1. Place the motor base of your Cuisinart
®
Hurricane
™
on a flat, sturdy surface.
It is important that the surface be clean and dry. Fit the blender jar on the
jar pad. Once the jar is assembled and is in position on the jar pad, plug the
Cuisinart
®
Hurricane
™
into an electrical outlet.
2. Add all necessary ingredients to the blender jar and replace the cover. You
may add more ingredients by removing the removable measuring cup in the
cover and dropping ingredients through the opening. Replace the
measuring cup after adding ingredients.
Do not put hands in blender jar
with blender plugged in.
Note:
To remove blender jar cover, lift edge of cover at jar spout area upward.
Lifting removable measuring cup will not remove cover.
3.
START BLENDING:
Press the On/Off button. The red LED indicator light
will illuminate and flash, indicating that the blender is turned on, but no
speed has been selected. The Up and Down arrows will also illuminate.
This is Standby mode.
4.
CHOOSE BLENDING SPEED:
Press desired function or speed. The
indicator light for the activated function or speed will Illuminate, and the
blender will begin to run at the chosen speed or function. It is possible
to switch speeds without pressing the On/Off button by simply pushing
another speed or function button.
5.
TO PAUSE OR STOP BLENDING PROCESS
a) To Pause the Blending Process:
Push the button corresponding to the
speed at which you are currently blending. For example: If you are blend-
ing on High speed, push the High speed button again and the blender
will stop blending, but the unit will remain on and the function button will
flash. (To restart blending, simply press the button again.)
Note:
By pausing the blending process, you will also pause the timer. The
timer will pause until you start blending again. Changing functions will reset
the timer.
b) To Stop the Blending Process:
Push the On/Off button when you are
finished with your recipe and would like to turn the blender off. Pausing
will stop the blender, but NOT turn it off.
Note:
When you push the On/Off button to power the blender off, the
timer will stop counting and the LCD display will be off. When the blend-
er is turned back on and a speed button is pushed, the timer will begin
to count up to maximum time of 3 minutes.
2.
3.
4.
5.
6.
7.
8.
1.
