14
15
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
12.
13.
a. Insert the Grease Tray (CH) into the opening
in the Upper Back Panel (BG), making sure to
engage tracks located under the Burner Box
Assembly (BA).
b. Place the Grease Cup (CI) onto the tracks
located on the underside of the Grease Tray
(CH).
CAUTION:
Be careful when removing
the Grease Tray (CH) and the Grease
Cup (CI). When in position, the Grease
Cup (CI) will sit recessed under the
burner box (BA).
Back view
A
CH
CI
BG
a. Place the Flame Tamers (BD) into the Burner
Box (BA).
b. Place the Cooking Grates (BE) into the
Burner Box (BA), as shown.
14.
A
B
BD
BE
BA
BA
a. Remove the Electronic Ignition Battery Cap
(CD2) and the plastic nut from the Electronic
Ignition Box (CD1).
b. Feed the Electronic Ignition Assembly (CD1)
through the opening in the Left Cart Side
Panel (EA) and secure using the nut.
B
CD1
CD2
+ -
A
C
D
E
CF
CE
TIP:
The Electrode Set, Main Burner (CE) wires
can be found attached to the Control
Panel heat shield (CF), as shown.
d. Insert the three Electrode Set, Main Burner
(CE) wires into the Electronic Ignition
Assembly (CD1), as shown in figure D.
e. Insert the two Electronic Ignition Button (DD)
wires into the Electronic Ignition Assembly
(CD1), as shown in figure E.
CE
CE
DD
CD1
CD1
CD2
EA
CD1
c. Insert one “AA” battery into the battery
compartment with the positive end facing
outward, as shown. Secure using the
Electronic Ignition Battery Cap (CD2).
