16
17
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
14.
15.
BF
C
c. Place Warming Rack (BF) onto Burner Box
(BA) by inserting the three positioning rods
into the rear panel of the Burner Box (BA),
as shown.
FOR PROPANE MODELS ONLY.
For natural gas models, follow step 16.
a. Position the Regulator hose (CB) through the
hole in the Right Cart Side Panel (EB).
b. Position the 20 lb propane tank onto the
bottom shelf (ED), and secure using the
bolt (F4) (already attached) located on the
underside of the bottom shelf, as shown in
figure B.
c. Attach the Regulator coupling nut (CB) to
the LP cylinder valve. Be careful not to cross
thread. Hand tighten only.
d. Perform leak test. See page 4 of the
Cuisinart
®
Safety & Care Manual.
ATTENTION:
For your families safety,
do not attempt to light this BBQ until
you have reviewed pages 4-8 of the
Cuisinart
®
Safety and Care Manual.
All Safety and Leak test MUST BE
PERFORMED BY THE END USER,
prior to lighting this BBQ.
WARNING Do not store extra
propane tanks within BBQ cart.
EC
A
B
FOR NATURAL GAS MODEL ONLY.
a. Attach the Natural Gas Hose (CB) to the
Manifold Assembly (CA), as shown.
b. Perform Leak Test. See page 6 of the
Cuisinart
®
Safety and Care Manual.
16.
ATTENTION:
In order to complete
installation of your Natural Gas BBQ a
1/2” or 3/8” adapter may be required to
connect your BBQ’s Natural Gas hose
to your home gas supply. Contact your
Natural Gas supplier to purchase the
necessary part.
View under right side shelf
ED
ED
CB
EB
BA
CA
CB
F4
