8
6. Lift the kettle off the base to pour water.
All lights will turn off while the kettle is off
the base.
Note:
There is a 2 minute
standby mode when kettle is removed from
base while Keep Warm mode is on. Keep
Warm will resume if the kettle is returned to
base within 2 minutes.
If the kettle enters standby mode while
on the power base, press the to select
the needed temperature and press
to restart.
Brewing Coffee
1. Lift the kettle from the base and unlock
the lid by turning counterclockwise to
remove from kettle. Place the magnetic
drive system in the center of bottom
concave platform. Add the desired
amount of water – a minimum fill of 2
cups or maximum fill of 5 cups.
2. Install the coffee filter basket, following
instructions on page 7, and turn
clockwise to lock in place, aligning the
filter basket knob with arrow on handle.
3. Fill the filter basket with coffee grounds,
adding 1 level scoop of ground coffee
per cup. Adjust the amount according to
taste.
Note:
The maximum capacity for
ground coffee is 5 scoops (5 tablespoons)
kettle. Exceeding this amount may cause
overflow.
4. Place lid back on and turn clockwise to
the locked position, aligning arrows on
lid and handle. Return the kettle back
onto the base and plug in.
5. Turn kettle on by pressing . The current
water temperature, strength bars and
Keep Warm indicator will appear on
the LED.
6. Press to scroll through and select
desired temperature for brewing coffee.
7. Press
to scroll through and choose
desired brew time between 3 and 8
minutes. The default brew time is
4 minutes.
8. Press
to select desired coffee
strength. There are 3 settings for
strength (
).
9. Press
. The selected brew temperature
will flash and the kettle will begin heating.
The LED screen will display the actual
water temperature, the start/stop button
icon, and the selected coffee strength.
To stop heating anytime, press again.
10. When the kettle has heated to the
desired temperature, an alert (one short
beep) will sound and coffee brewing will
begin. The LED screen will display
countdown timer for brew time selected.
The coffee brewing function will begin
and an alert (one short beep) will sound
when brewing is complete.
11. When the heating process is completed,
the Keep Warm preset temperature and
start time will engage. The temperature
will be maintained for 30 minutes. The
countdown will show on LED display.
Note:
Keep Warm ( ) will be selected
unless you deselect it. See more
information in Note 1a, page 6 .
12. When Keep Warm reaches 00:00, an
alert will sound indicating that the kettle
is changing to standby mode.
Note:
There is a 2-minute standby mode
if kettle is removed from base while Keep
Warm mode is on. Keep Warm will
resume if the kettle is returned to base
within 2 minutes.
Note:
If the coffee strength bars (
)
are not displayed on LED screen, the
filter basket is not installed properly. Be
sure the coffee basket locks in place and
basket knob aligns with arrow on handle.
