Cuisinart DCC-3650C, Instruction Booklet

Page: 7 / 12

7
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will appear until you set the time.
Hold down Hour or Minute button until the
clock begins flashing. Press either button to
select the desired time. Hold buttons down
to scroll through the digits, or press and
release to advance one digit at a time.
When scrolling, the numbers will advance
slowly and then speed up. When the
number displayed approaches the desired
time, press and release to advance one
digit at a time. Be sure the PM indicator is
on if a PM time is desired. To complete
clock setting, do not touch buttons for 2
seconds. The clock display will stop
flashing and selected time will be displayed.
SETTING THE AUTO ON TIME
When you hold the Prog/Auto On button, it
displays a previously selected Auto On time
or the default time (12:00 pm).
1. Using the Hour and Minute buttons
Follow directions under SETTING THE
CLOCK (above) to program your start-
brew time.
2. Set Coffee Strength
During Auto On setting, you can select
desired coffee strength (Regular or Bold)
by pressing the Strength button.
3. Set Coffee Temperature
During Auto On setting, you can
select desired coffee temperature (Reg,
Hot or X-Hot) by pressing the Coffee
Temp button.
4. Complete Auto On setting
Press Prog/Auto ON button once. A blue
light will appear to indicate Auto On
function is set.
NOTE: To start brew time at the same
time the next day, simply press the Prog/
Auto On button and release. Blue Auto
On light will go on.
SETTING THE AUTO OFF TIME
Hold Auto Off button
Clock display will flash 2:00. Follow
directions under SETTING THE CLOCK
(above) to program your coffeemaker to
shut off from 0 to 4 hours after brew cycle
is finished.
MAKING COFFEE
Follow instructions in BEFORE BREWING
YOUR FIRST POT OF COFFEE in previous
section and get ready to start enjoying
your coffee.
1. Insert charcoal water filter
Follow directions for the preparation and
insertion of the filter on page 8.
2. Fill the water reservoir
Open the reservoir cover by lifting it up.
Pour in the desired amount of water
using the water level indicator located at
the side of the coffeemaker window.
3. Set preferences
a. Push the 1–4 cup button if you are
brewing less than 5 cups.
b. Press Strength button to select flavour
strength – Regular or Bold.*
BEFORE BREWING YOUR
FIRST POT OF COFFEE
During the manufacturing process,
dust can get trapped in your coffeemaker.
We recommend flushing out the system
before brewing your first pot of coffee.
Simply fill the reservoir and power on the
unit. (follow steps 5 and 6 in MAKING
COFFEE instructions).
DO NOT
ADD COFFEE!
Once you have done that, brew a pot of
real coffee and enjoy Cuisinart at its best!