Cuisinart CSB-80, Instruction And Recipe Booklet

Page: 11 / 72

11
OPERATION
BLENDING
The specially designed blade is for mixing and puréeing all kinds of
foods, including salad dressings, powdered drink products, soups and
sauces and blended drinks like milkshakes or smoothies.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the
most flavorful, full-bodied recipes. Be careful never to remove the
blending shaft from the liquid while in operation, for it will splatter.
Tilt the pan or bowl away from you if needed to ensure the protective
blade guard on the blending shaft is fully submerged.
1. Put blending shaft into mixture to be blended.
2. Press and hold the Power button. Press and hold the Lock/
Unlock button on top of the motor housing to turn motor on.
Once motor is on, you can release the Lock/Unlock button but
continue to hold in the speed button. You can also press the
Lock/Unlock button first, holding it down as you press the speed
button to turn motor on. Do not hold power button down for more
than 60 seconds at a time.
3. Do not press the button for longer than 60 seconds at a time.
4. Unplug immediately after use.
CAUTION: DO NOT PUT FINGERS NEAR BLADE.
TO DISLODGE FOOD, UNPLUG HAND BLENDER
FROM THE OUTLET FIRST.
PULSING
To pulse, press and release Power button.
FOOD PROCESSING
CHOPPING FOOD
1. Place the work bowl firmly on a flat, sturdy surface like a
countertop.
2. Put food in the work bowl. Be sure the food is cut into small
pieces (½ to 1 inch), and the bowl is not overloaded.
3. Put the food processor cover on top of the work bowl. Be sure
the cover is properly seated.
4. Press and hold the Power button.
Note: Due to the powerful motor provided with this unit,
Cuisinart recommends using one hand to support the
work bowl during operation.
5. When you have finished processing the food, stop the machine
by taking your finger off the Power button.
6.
WHEN THE BLADE STOPS MOVING
, unplug the unit.